- Hello, any comments on why the P5KC isn't ready for windows 7, like others P5K series MB, would it be in the near future? Thanks GB.
- Template:10.5.2. This is a component level hardware compatibility list. We want to keep it as accurate as possible, but please, do not entirely rely on this list when.
- Great work Netkas! No kext needed? Just the bootloader would be enough? Thanks!
![asus p5kr p35 realtek hd driver asus p5kr p35 realtek hd driver](http://one-voronezh.ru/images/2015/07/21/11255/thumb_14375075831107310370.jpg)
Последние комментарии. Gasukomuf пишет: Всем доброго дня! От души, спасибо за программку, всё.
HCL 10.5.2
![asus p5kr p35 realtek hd driver asus p5kr p35 realtek hd driver](http://driverdom.com/picters/device-mini/80_80_driver-asus-motherboard-p5kr.jpg)
![asus p5kr p35 realtek hd driver asus p5kr p35 realtek hd driver](http://resource.mmgn.com/Hardware/thumb/ASUS%20P5K_EPU%20-%20motherboard-1.jpg)
Hardware Name Chipset Notes EFI/kernel working Fully Working w/o Patch IP35-PRO Intel P35 ICH9R Intel E7500 CPU 2.93GHz Pixelview 9400GT 512MB VGA (EFI string) Ok!
This is a component level hardware compatibility list. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying hardware. Add which parts you have working in the categories listed below, or create a new category. Please keep alphabetical order inside the categories. The categories themselves are ordered by popularity. Please list any caveats or problems as well. ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work. Please add hardware into tables. This is for 10.5.2 builds only. For how to edit the Wiki, please see this thread. Thank you! INTEL CPU Hardware Name (alphabetical)ƒ Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch AB9 Pro Intel P965 & ICH8R Install Method (1): Leo4All v3 BIOS Version: 22 Audio: Works LAN: Works Install Instructions: Formatted as Fat32 using XP and Acronis (could've used anything), then erased with disk utility in OSX install Installed using Vanilla Kernel, and default SMBIOS selections under customize Complete Install and Reboot Use -v on first boot Used NVKush found here Update to 10.5.6 worked but not fully tested yet (using DSDT Patcher and OSX86 Tools.) Followed the guide here Install Method (2): Kalyway 10.5.2 dvd rom (SATA works - had problems using IDE optical drive) BIOS Version: 22 LAN: Works OOB USB: Some problems, solved using USB fix kext (see right ->>) SOUND: Onboard works OOB, but requires kext for custom soundcards like M-Audio here VID RESOLUTION: Depends on vid card, see here for hd48xx thread! Install Instructions: Installed via sata dvdrom (IDE not recognised) found here Seperate Sata HDD formatted (fat32) using Installer and installed onto Vanilla kernel worked fine, don't add or change anything yet at install. Use -v on first boot EFI & Vanilla Kernel works Works out of box! No patch needed for LAN Kalyway USB fix here (if needed) Get kexthelperB7 to install kexts from cheetha.net AB9 QuadGT Intel P965 & ICH8R Install Method: Kalyway 10.5.1 & Combo Update BIOS Version: Unknown; Revision: Unknown Audio: Works with patch below LAN: Unknown SATA & IDE: Problem Install Instructions: Partitioned as MBR Installed using Vanilla Kernel, and MBR selections under customize Complete Install and Reboot Use -x on first boot Setup First boot in safemode Use kexthelper (here) to install kexts below Install Sound Driver for Onboard sound from here EFI & Vanilla Kernel works Audio Needs patching AW9D-MAX Intel 975X Install Method: Leopard-10.5.2-AMD-EFI.iso DVD BIOS Version: 15; Board Revision: 1 Audio: WORKS With AzaliaAudio (from DVD) LAN: Both WORK OOB SATA & IDE: Works OOB (SouthBridge SiliconImage Driver from DVD used) ATI Sapphire 3870 works (if you find the right combination of drivers to install from the DVD...) EFI w/ Vanilla Kernel WORKS SiliconImage3132.kext has some ownership problems. chmod/chown + reboot makes the pain go away. IC7-G Intel 875PE Install Method: Kalyway 10.5.1 with 10.5.2 KalywayComboUpdate BIOS Version: 28; Revision: Unknown Audio: Works OOB LAN: Works OOB, no auto-detect at starup, need to disconnect and reconnect to work SATA & IDE: Works OOB Unknown LAN has auto-connect problems IP35 Pro Intel P35 + ICH9R Chipset Install method: Kalyway 10.5.1 or Retail Mac OS X Server 10.5 DVD w/ PC-EFI & Combo Updater Kalyway: Install options: Formatted GUID, EFIv8 + Vanilla Kernel Updated to 10.5.2 using Kalyway Intel combo update + Kalyway 10.5.2 kernel Leopard Graphics Update v1.0 worked with no hassle Bios version: 1.4, Rev. unknown Bios setup: SATA set to AHCI; EIST: enabled, Disable bit: enabled Audio works with: AppleHDAPatcher v1.20 + ncx5 ALC888 dump SATA works as AHCI IDE status: unknown LAN works out of the box Firewire works out of the box Mac OS X Server: BIOS Version: 14 Audio: Realtek ALC888 HD, AppleHDA patch LAN: 2x OnBoard Gigabit LAN, no patch (can't remember controller-name) SATA & IDE: 6 Built-In S-ATA ports in AHCI, 2 eSATA ports in AHCI (JMicron), 1 IDE port (JMicron), and 1 floppy port (JMicron). All working. EFIv8 + Vanilla kernel No; Audio needs patching IP35P Intel® P35/ICH9 Chipset Install method: Kalyway 10.5.2 Kalyway: Install options: Formatted GUID, EFIv8 + Vanilla Kernel Updated to 10.5.4 from Apple Site + using Kalyway Intel combo update 10.5.3 + Kalyway 10.5.2 kernel Leopard Graphics Update v1.0 worked with no hassle Bios version: 11, Rev. unknown Bios setup: SATA set to AHCI; EIST: enabled, Disable bit: enabled Audio: Currently not working SATA works as AHCI IDE status: Working out of box LAN Working out of the box Firewire Working out of the box Audio: Unknown LAN: 1x Gigabit SATA & IDE: 6 Built-In S-ATA ports in AHCI, 2 eSATA ports in AHCI (JMicron), 1 IDE port (JMicron), and 1 floppy port (JMicron). All working. EFIv8 + Vanilla kernel No; Audio Currently Not Working IP35-E Intel P35 Install Method: Kalyway 10.5.1 & Apple 10.5.2 Update BIOS Version: 15; Revision: Unknown Audio: Need patch from here or essay LAN: Works OOB SATA & IDE: SATA works OOB, IDE works after install Optical Drive: Which one? Any weird problems with installation? Shutdown / reboot works only with 10.5.1 - needs custom kernel for 10.5.2, Sleep not tested Vanilla & EFI works Audio needs patching IX38 Roadster Intel X38 + ICH9R Chipset Install Method: BrazilMAC 10.5.0 (Updated to 10.5.2 using Kalyway Intel combo update) BIOS Version: 12 Audio works with: AppleHDAPatcher v1.20 + ncx5 ALC888 dump LAN: Works Native SATA & IDE: SATA works in AHCI mode. Does not work in RAID mode. Firewire works out of the box EFI/Vanilla kernel: Not Tested No, audio needs patching. LG-95 Intel 945GC + ICH7 BIOS version: 10, Rev. 1.0 Installation (10.5.0) method: BrazilMAC method with EFI 8.0 on GPT using iGuru guide Update to 10.5.2: Netkas method Audio (ALC 888): Works with skippyretard patch Video (GMA 950): Works with modified AppleIntelIntegratedFramebuffer.kext from BrazilMAC guide LAN: Works out of the box IDE and SATA: Works out of the box ACPI: Sleep/Wake/Restart work (Shutdown works half of time) Yes No, audio and video need patching LG-95 Intel 945GC + ICH7 BIOS version: 14 Installation method: Leo4all v2 (10.5.2) with Vanilla Kernel 9.2.2 Audio (ALC 883): 2ch only so far. Works with Azalia patch from skippyretard. Tried the 883 kexts from Leo4all v2 install, latest Taruga's 5.1 kext (April 24th, 2008) and mens wetsuits skippyretard's 883 pkg with no luck. Linux reconizes ALC883 OK. Maybe the guy up here with an ALC888 has a different mobo revision. Video (GMA 950): Works with GMA950 driver from the Leo4all install DVD. QE/CI enabled and no artifacts. Resolution fixed at 1024x768, I changed it editing com.apple.Boot.plist adding <string>"Graphics Mode"="1280x1024@85"</string>. There is some minor mouse blinking when moving over the dock, hardly noticeable. LAN: Works out of the box IDE and SATA: Works out of the box ACPI: Restart & Shutdown works fine so far. PROs: Very cheap and compatible. CONs: NOT an overclocker motherboard, FSB is locked in the Bios. Yes No, audio needs patching Fatal1ty F190-HD ATi Radeon Xpress 1250 Install Method: Kalyway 10.5.1 - 10.5.2 Kalyway Combo Update BIOS Version: Modded from Abit Forum; Revision: 17 Audio: Realtek ALC888, Download Installer Here LAN: Works OOB SATA & IDE: IDE and SATA full Function OOB however you must use SATA channels in order i.e. miss something plugged in on the first sata channel and the installer will not find anything in channels 2, 3 and 4 and you will get 'IOATAStorage controller' blocking Bus error in verbose mode. Optical Drive: LG Sata DVD-RW/RAM drive no problems Shutdown works, restart doesn't, Unsure about sleep. There is no support currently for the x1250 integrated graphics. PRO:'s Cheap Mobo good features looks amazing and is M-Atx. Overclocks well. CON:'s No integrated Graphics but I am using an ATi 3850 HD Card with full QE/CI so no real loss overall its a great little board! Yes No audio needs patching and onboard graphics don't allow resolution change or QE/CI due to no graphic kext. Fatal1ty FP-1N SLI (maybe FP-IN9? there is no "1N") LGA 775 NV® NF650i SLI™ Install method: Kalyway 10.5.2 to a Primary SATA Partition, partitioned through Diskpart in Vista to AF. Bios: 14 with SLIC table Patch (this shouldn't matter) Audio: Works OOB, with Jack Sensing working well USB: Seems to work well. Logitech USB headset works perfectly OOB LAN: OOB All power functions work OOB RAM: All 4GB working perfectly. Loving my 4Gb Mac Yes All good I-45C 945 GC / ICH7 GMA950 Install method: Kalyway 10.5.2 to a Primary IDE Disk Audio: Works OOB USB: Seems to work well. USB keys/HDD OK. Logitech Webcam OK with macam. IDE : OK SATA : not tested LAN: Works OOB (Marvell kext included in Kalyway 10.5.2) Video : Works OOB Power functions not tested RAM: All 4GB working perfectly. Price : 40 Euros !!! ;-) Unknown All good I-45CV 945 GC / ICH7 GMA950 Install method: Kalyway 10.5.2 on 300GB Maxtor IDE Processor: Intel Dual-Core E2200 2.2GHz Audio: Works OOB USB: Works OOB. Externall USB HD, USB pendrive, CF card reader, Bluetooth pen. IDE : OK. Maxtor 300GB and Philips DVD burner. SATA : Works OOB LAN: Does not work. Not detected. I installed a 6€�realtek 8139 based card. Worked OOB Video : Works OOB (intel GMA950 driver included on Kalyway). Resolutions up to 1280x1024 Power functions work Ok but not with Vanilla kernel. Sleep works if selected S1 mode on Bios. RAM: 1x Kingston 2GB DDR2 667 working perfectly. Price : 35€�MotherBoard Vanilla kernel works, but power functions not ok. (doesn't resstart nor shutdown) LAN doesn't work. AMD CPU Hardware Name (alphabetical) Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch Abit AN-M2[Sammelthread AN-M2 (german) NF630a NVIDIA® 7050 Install Method: Kalyway 10.5.2, Atkos 10.5.2 AMD, Leo4Allv4.1 BIOS Version: Abit; Revision: 18 BIOS setup options: lan bootrom enable; sata->raid->AHCI Audio: Works out of the box LAN: works with this add 0x054C10DE to IOPCIPrimaryMatch (Info.plist), surfing online surf shop ok so far, issues with filezilla IDE: Full DMA speed with AppleNforceATA.kext and IOATAFamily.kext from Leo4allv4.1 (MCP67) SATA: not fully tested yet (enable AHCI under SATA/RAID) USB: ok VIDEO: Framebuffer only, no accel Shutdown, restart works, sleep not tested Install Instructions: Partitioned as MBR Installed using an AMD Kernel, and MBR selections under customize Complete install and reboot Use -s on first boot "mount -uw /" then "passwd" and set a password Delete or move all graphic driver: "cd /SYSTEM/LIBRARY/EXTENSIONS; rm NV*; rm ATI*" "touch /var/db/.AppleSetupDone" finally "exit" Edit /Library/Preferences/SystemConfiguration/com.apple.Boot.plist for your framebuffer screen resolution: <key>Graphics Mode</key><string>1280x1024x32</string> Overall: A Cheap and very energy efficient AMD board (17W idle with Sempron1100/1200/0.8V, 2.5HD, PSU) EFI ok LAN, IDE needs patching . . . . . . . . [ Hardware Name Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch PX845PEV Pro i845PE Chipset Install Method: Unknown BIOS Version:; Revision: 800 v2 Audio: Realtek AC97 ALC 655 Working LAN: Via Rhine III Working Unknown Yes [ Hardware Name Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch I975XA YGD i975 Install Method: Kalyway 10.5.1 & Update BIOS Version: Unknown; Revision: Unknown Audio: Works with ALHC888 and Apple HDA Patcher v1.20 LAN: Not tested SATA & IDE: IDE works, SATA not tested Wireless: Atheros 300N works well with RT2860 drive ----------------------------------------------------- 2nd Install Method: Leopard-10.5.2-AMD-EFI BIOS Version: 1.10a CPU: Intel Core2Duo T7400 2,16Ghz @ 2,4 Ghz - FSB 185Mhz RAM: 4GB (4 x 1GB DDR2 800Mhz) Graphic adapter: ASUS EN8600T Silent 512MB - NVInstallerV.33.pkg works nice! Audio: didn't work with Apple HDA Patcher v1.20 - beta4some861_880Installer.zip worked LAN: works Installation time for 2nd method 90 minutes EFI works Audio needs patching i975Xa-YDG Intel 975X Install Method: Kalyway 10.5.2 Intel AMD OSX86 BIOS Version: 6PG; Revision: 1.09 Audio: Yes LAN: Yes SATA & IDE: Yes Wireless: None CPU: Intel CoreDuo T2400 1,83Ghz @ 2,8 Ghz - FSB 255Mhz RAM: 3GB (DDR2 800Mhz) Graphic adapter: ASUS 3870 Audio: Yes LAN: Yes Kalyway customization: Kernel_9.2.2_modin for USB to work, NATIT_For_X2000_X3000_series for video to work Yes . [ INTEL CPU Hardware Name Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch ASRock 945GCM-S Intel 945gc & ICH7R Fully working using iAtkos 2.0i, BIOS update not needed (using 1.20); Type "cpus=1" at install. It takes about 5 minutes at boot. Audio, video (Quartz, 1024x768, some mouse tearing) LAN, USB works ok. WLAN using D-Link DWA-520. Dual boot with XP, does not work with Windows 7. Asrock 4core 1333 eSata2 Intel P31/G31 & ICH7R SATA and PATA and IDE works Onboard Lan works Attached Graphics card works fully onboard USB 2 works Onboard Audio works Onboard Firewire does not work Floppy Dirve does not work in Mac OS. YES Needed to install a BIOS update to work. Firewire needs patch Asrock 4CoreDual SATA VIA Apollo PT880Pro/PT894 Install Method: Kalyway 10.5.1 & Kalyway Combo Updater BIOS Version: 1.9; Revision: 1 Audio: Works OOB LAN: ViaRhineIl works with Stevo4 Patch SATA & IDE: Both work OOB (may need to append SATA ID 0x73721106 into AppleVIAATA.kext for SATA to work on SATA2 board) PC-EFI works LAN needs patching Asrock 4CoreDual-SATA2 Northbridge: VIA® PT880 Pro/PT880 Ultra - Southbridge: VIA® VT8237S Install Method: Kalyway 10.5.1 w/TheStevo4 ppf + Kalyway 10.5.3 ComboUpdate BIOS Version: 1.9 (2.0 doesn't works) BIOS Options: defaults Options Audio: ALC888 in & out stereo working (7.1 not tested) LAN: ViaRhineII work with this kext IDE: Works, SATA: Works with this PKG or if you want to inject the kext into you iso file use this kext and use this method for the english users use google translation Sleep, Shutdown & Restart Works with the 10.5.2 Sleep_kernel PC-EFI works, NO Vanilla Kernel (VIA Chipset) TheStevo4 Patch, alc888, ViaRhineII and SATA Asrock Conroe 1333 Intel 945GC & ICH7 Install method: Kalyway 10.5.1 or Kalyway 10.5.2 Install options: Vanilla Kernel, BOOT_efi_mbr Updated to 10.5.2 using the original Apple combo update using Devin's procedure on insanelymac [ Updated to 10.5.3 using Kalyway 10.5.3 combo update (had to reinstall discrete nVidia card driver afterward through NVinstaller to get Display Resolution change and QE/CI working again) Updated to 10.5.4 using the original Apple update tool without any problems Leopard Graphics Update v1.0 normal install, works Bios version: P 1.30 (no other firmware later than 1.30 works -tested up to 2.10-) SATA + PATA works Onboard LAN work Audio works with alc_out (2ch out only) YES Audio needs patching Asrock Conroe 1333 Intel 945GC & ICH7 Install Method: Kalyway 10.5.1 & Update to 10.5.2 following Netkas's guide BIOS Version: P1.30; Revision: 1.0 BIOS Options: CPUMAXID set to disbled Audio: ALC888, AFAIK only Azalia 2.1 output LAN: Works OOB SATA & IDE: Both work OOB PC-EFI v8 & Vanilla Kernel work No, Audio needs patching Asrock Conroe-1333 D667 Rev. A/G 1.03 Intel 945GC & ICH7 Install Method: Kalyway 10.5.2 Modified BIOS Version: 1.80; It's nice to have BIOS 1.80 because it supports latest CPUs BIOS Options: Default Options Audio: Works without Patches (Except Input) LAN: Works OOB SATA & IDE: Works OOB You can find the Moded BIOS here[ PC-EFI & Vanilla Kernel work Everything Works Without Patching. Credits go to Kabyl (InsanelyMac) He made the moded BIOS. Asrock Conroe 1333 D667 Intel 945GC & ICH7 Install Method: Kalyway 10.5.1 + Devin 10.5.2 Update method BIOS Version: 1.3; Revision: Unknown BIOS Options: HPET "Enabled", Execute bit "disabled", Suspend to ram "Auto" Audio: Need ALC888 patch but no input LAN: Works OOB SATA & IDE: Works OOB PC-EFI & Vanilla Kernel work Audio needs patch Asrock ConRoe945G-DVI Intel 945G + ICH7 Install Method: Kalyway 10.5.2 SleepKernel EFI8 MBR BIOS Version: v1.90 Audio (ALC888): 2Ch Out Works with AppleAzaliaAudio and KEXT-Edit LAN (R8111B): Works SATA & IDE: Works Video (GMA 950): Works EFI v8 Works Audio Needs patching Asrock 775V88+ VIA® PT880 chipset Install Method: Kalyway 10.5.2 BIOS Version: Unkown BIOS Options: Unkown Audio: Works OOB. But only the left side of the speaker is working. LAN: Needs Via Rhine Driver IDE: Works OOB Unkown Asrock P4i65G Intel 865G (North) & ICH5 (South) Install Method: Leo4Allv2 10.5.2 BIOS Options: Default options. Audio: Need AC97 patch LAN: Not Tested SATA & IDE: IDE works fine, SATA not tested. Also applied ICHx patch and used legacy APCI PC-EFI works, no vanilla kernel. Audio needs patch AMD CPU Hardware Name (alphabetical) Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch Asrock 939 Dual-VSTA Northbridge: ULi M1695 Southbridge: ULi M1567 Install Method: Zephyroth AMD 10.5.2 Rev.1 Options: 9.2 kernel Audio: unknown, using usb sound card LAN: Onboard Not Recognized, using realtek card SATA & IDE: use this kext for full speed No PS/2 unknown Onboard audio, lan and ps/2 need patching Asrock 939Dual-SATA2 Northbridge: ULi M1695 Southbridge: ULi M1567 Install Method: Zephyroth AMD 10.5.2 Rev.2 Options: 9.2 kernel Audio: ULi M5455 LAN: ULi 5263 SATA & IDE (SATA only working from II slot) unknown' Onboard audio, lan (lan works after install until first reboot then breaks) need patching (Works in 10.5.4! See HCL_10.5.4#Asrock and threads for LAN driver and Audio driver) Asrock ALIVE NF6G-VSTA NForce 4 (MCP61) Install Method: Zephyroth AMD 10.5.2 Rev.1 Options: 9.2 kernel IDE/SATA Controller: NForce 430 (MCP61) Sound: NVidia HD Audio (ALC888), IN/OUT/Mic working! Wired Network 1: NForce 430 LAN (03EF, RTL8201CL PHY) (random lockups may occur, extra PCI/PCI-E NIC is recommended) EFI: Yes Vanilla Kernel: No (AMD CPU) Audio, SATA and Network need patching (IDE is slow without the patch) Asrock ALiveNF7G-FullHD R3.0 [Sammelthread ALiveNF7G-FullHD/Ready/720p (german) NF630a NVIDIA® 7050 Install Method: Kalyway 10.5.2, Atkos 10.5.2 AMD, Leo4Allv4.1 BIOS Version: Asrock; Revision: 1.10 (5/26/2008) BIOS setup options: - Audio: Works out of the box LAN: works with this add 0x054C10DE to IOPCIPrimaryMatch (Info.plist), surfing ok so far, issues with filezilla IDE: Full DMA speed with AppleNforceATA.kext and IOATAFamily.kext from Leo4allv4.1 (MCP67) SATA: not tested yet USB: ok VIDEO: Framebuffer only, no accel Shutdown, restart works, sleep not tested Install Instructions: Partitioned as MBR Installed using an AMD Kernel, and MBR selections under customize Complete install and reboot Use -s on first boot "mount -uw /" then "passwd" and set a password Delete or move all graphic driver: "cd /SYSTEM/LIBRARY/EXTENSIONS; rm NV*; rm ATI*" "touch /var/db/.AppleSetupDone" finally "exit" Edit /Library/Preferences/SystemConfiguration/com.apple.Boot.plist for your framebuffer screen resolution: <key>Graphics Mode</key><string>1280x1024x32</string> Overall: A cheap, stable and energy efficient AMD board (19W idle with AMD 4850e/1200/0.8V, 2.5HD, PSU). Good undervolting-BIOS: 0.8V EFI ok LAN, IDE needs patching Asrock ALiveNF7G-HDReady [Sammelthread ALiveNF7G-FullHD/Ready/720p (german) nForce 630a (MCP67) NVIDIA® 7050 Install Method (advanced): Retail Leopard installed with custom Pre-Boot CD Kernel: Voodoo XNU Kernel 1.0 Rev. A BIOS Version: Asrock; Version: 2.10 (1/7/2008) BIOS setup options: - Audio: Realtek ALC888, Device ID: 0x055c10de / 0x18490888, Legacy AppleHDA for BOOT-132 LAN: Realtek RTL8211B, Device ID: 0x054c10de, Driver: nForce LAN driver, working OOTB since 10.5.6 IDE: MCP67, Driver: NForceATAController for MCP67 SATA: not tested yet Firewire: not tested yet USB: OK Video: Integrated Geforce 7050 with shared memory, no Shutdown, restart and sleep works (I had to change USB/PS2 standby power jumper) EFI ok IDE, sound, LAN needs patching Asrock ALiveXFire-eSATA2 Northbridge: ATI CrossFire Xpress 1600 (RD480) Southbridge: ATI SB600 Install Method: Zephyroth AMD 10.5.2 Rev.1 BIOS Version: 2.60+; Revision: Unknown BIOS Options: If you want to install on a SATA drive, make sure in the IDE menu, "AHCI" is chosen rather than "Non-Raid" otherwise you may get errors LAN: Works OOB SATA & IDE: Works OOB unknown Audio may need patching . . . . . . . . . . . [ INTEL CPU Hardware Name Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch Rampage Formula Intel X48 + ICH9R Install Method: Kalyway 10.5.2 with SATA Optical drive BIOS Version: 0403 ADI 1988B Audio: works Marvell 88E8056 LAN: both port works ICH9R SATA: all 6 ports working JMicron JMB368 PATA: works (except optical drive) USB: all working Firewire: not yet tested This board works with 9800GX2 on second PCI-E slot using apple's 9800GX2 OpenGL driver when updated to 10.5.5 EFI working, only 9.2 sleep kernel allow fully functional sleep/wake and shutdown. Yes. For Kalyway 10.5.2, update with Kalyway 10.5.3 combo + kernel update, 10.5.4 through Apple update. 10.5.5 not yet tested. Only ToH 9.2 sleep kernel works. P5VD2-MX SE VIA P4M890 Intel Pentium D 805 Smithfield 2.66GHz, also used Intel Pentium D 935 Presler 3.2GHz with much success. Install Method: Kalyway 10.5.2 BIOS Version: unknown Audio: works after use of OSx86 Tools Realtek LAN: works after use of Osx86 Tools (used and old LAN from a Compaq Presario Pentium 2, worked OBO, then downloaded and installed kext for Realtek) SATA: comes and goes USB: all working Firewire: works fine VGA: Nvidia 6200 LE 128MB, installed Titan Driver and EFI strings, got rid of crappy 1024X786 resolution, now running at 1440X900. XFX 7600 256MB Nvidia card also works but system prefers the older card for some reason. EFI working, Chameleon V8 installed afterwards, Darwin was shaky, had to use Boot123 to get system working Not exactly, but Osx86 Tools fixes almost everything. Just don't try to update to 10.5.6 or 10.5.7. Do not try to update to higher system, tried using Atkos 10.5.5 and iPC 10.5.6, both fail after three reboots. P5E Deluxe Intel X48 + ICH9R Install Method: Kalyway 10.5.2 / iATKOS_Si 10.5.5 with SATA Optical drive BIOS Version: 0205 ADI 1988B Audio: works (kalyway default selection works, iATKOS need patch from here) Marvell 88E8056 LAN: works (kalyway default selection works, iATKOS need to install the marvel pkg extracted from kalyway dvd) ICH9R SATA: all 6 ports working JMicron JMB368 PATA: not yet tested USB: all working (if system is 10.5.4 or above, 9.2 sleep kernel will not mount any usb device, need 9.5 voodookernel) Firewire: not yet tested EFI working, 10.5.3 or older + 9.2 sleep kernel allow fully functional sleep/wake and shutdown, otherwise 10.5.4 or above need 9.5 voodoo kernel Yes. everything works right out of the box with all default selections with Kalyway. Sounds/Lan need patching if using iATKOS_Si 10.5.5 Maximus Formula Intel X38 + ICH9R Install Method: Kalyway 10.5.2 BIOS Version: 1201 Audio: Speaker and Digital Out works (sometimes have some minor issues) LAN: OOB SATA & IDE: OOB JMicron PATA: OOB USB: OOB (May not recognize all USB ports) Firewire: integrated VIA VT6308 works but crappy... buy a firewire pci card with VT6306 Had keyboard error with USB/PS2 adapter, no error using PS2 directly Install from dvd sata otherwise "still waiting for root device" USB DVD Installation works also Updating to 10.5.3 using "software update" does NOT work Shutdown does not work properly, fans keep rotating EfI & Vanilla Kernel yes, except audio P5E Intel X38 + ICH9R Install Method: Kalyway 10.5.1 - Install Info Below BIOS Version: 303; Revision: Unknown Audio: Audio Out works OOB, In doesn't work LAN: Works OOB SATA & IDE: Both work OOB Optical Drive: Which one? Any weird problems with installation? Do shutdown, reboot and sleep work? Installation Instructions: Combo Update (No Reboot) Kernel Update (No Reboot) Repair Permissions Reboot Apple Graphics Update (No Reboot) New Natit Driver Repair Permissions Reboot EFI v8 & Vanilla Kernel Yes P5W DH Deluxe Intel 975X + ICH7R Install Method: Kalyway 10.5.1/10.5.2 BIOS Version: 2602; Revision: 1.04G Audio: Realtek ALC882M works LAN: Marvell 88E8053 both ports work out of box SATA: all port works, ICH7R IDE works, Jmicron IDE work Onboard WiFi work with realtek 8187 drivers but unstable| Onboard FireWire: Both ports (1 backpanel and 1 in case) work OK. ez_raid ports work out of the box, natively. Raid0 works natively. Yes onboard wifi needs patching P5QL-PRO Intel P43 + ICH10 Install method: iDeneb 10.5.5 BIOS Version: Pathced 0601 DSDT FIX. Audio: Realtek ALC1200 - work with ALCInject.kext & AppleHDA.kext. LAN: Attansic L1 - kext from iDeneb disk doesn't work. Use PCI Realtek. SATA - OOB. IDE - did't test. ACPI (Shutdown, reboot) - work fine. Video: nvidia 7300 GT - work with NVinject from iDeneb disk. P5K Deluxe WiFi Intel P35 + ICH9R Install Method: Kalyway 10.5.2, updated to 10.5.3 with Kalyway combo 10.5.3 update, iDeneb 10.5.5 BIOS Version: 812; Revision: Unknwon Audio: Internal AD1988B only stereo out WORKS OUT OF BOX,audio in: works after patching with Taruga AD1988B rev3 Installer. but require to reinstall video. LAN1: Realtek WORKS OUT OF BOX, required to be ON in BIOS for Time machine to work LAN2: Marvel Yukon on internal PCIe bus fully works WORKS OUT OF BOX WLAN: Does not work, but there exists a patch to get it working SATA & IDE: Both SATA controllers fully work, IDE CD-ROMs and DVD-RW work EFI & Vanilla Kernel Work YES P5K-E WiFi/AP Intel P35 + ICH9R WORKS OUT OF THE BOX: ICH9 6x Sata ports Jmicron 2x E-Sata ports Firewire, USB, COM1 WORKS AFTER PATCHING: Audio=ad1988b fully working (stereo, 5.1 digital output, microphone,volume control) using taruga's drivers: [ Lan=marvel88e8056 Wifi=realtek 8187l, configured as ethernet and uses Realtek app. Leopard WIFI drivers now available here! WORKS FOR SOME/GIVES SYSTEM CRASHES IDE/PATA works BIOS SETTINGS (Update to latest 1004 or 1006): Set HDD-controllers 'ich9/jmicron' to AHCI mode, powerstate=S3 Processor: Enable apic2.0, disable speedstep, disable c1e, enable VT and XT 4gb ram working < dependent on BIOS settings, read the forum if you have kernel panic!!! Install method easy: Kalyway 10.5.1 Install DVD 'select right patches, try MBR if GUID fails' Updated to 10.5.2 using Kalyway ComboUpdate and kernel update. Updated to 10.5.4 using software update (vanilla 9.4 kernel works great, sleep works, everything works :D) iATkOS users use this thread Another Install Method (that I used after the easy method failed for me): Kalyway 10.5.1 Install DVD 'deselect everything except vanilla kernel, and MBR' Immediately update to 10.5.3 using Kalyway ComboUpdate, following its instructions closely (meaning apply kernel update before rebooting) Immediately update to 10.5.4 using software update (vanilla 9.4 kernel) Then install drivers like NVInstaller v.52 (if you have an nvidia video card) or audio drivers, etc. Install method advanced: Retail-Leopard-DVD, GUID, pc-efi8, with retail kexts 'remove appleintelcpupowermanagment.kext, add dsmos.kext', only AUDIO/LAN/VIDEO.kexts needs to be added after that, also may add applesmbios.kext for showing right info in system profiler. Retail-Leopard 10.5.2 + graphics update also work. see netkas.org for howto YES On DVD (Kalyway) or patch (iAtkos) P5K Premium/WiFi-AP Intel P35 &Intel ICH9R Kalyway 10.5.2 Version 0802 ADI AD1988B, AzaliaAudio only back connection RealtekRTL8110SC & Marvell88E8056 SATA works, IDE Works not as good HP dvd1070, works out of the box. all burning features working Restart and Shut down working out of box, sleep with newer version of kernel yes USB(memory sticks and cards) issues: only reads if was installed at start up. P5KC Intel P35 & ICH9 Install Method: Kalyway 10.5.1 and 10.5.2 Combo Updater BIOS Version: 2602 or 0903; Revision: Unknown Audio: ACL883 Tarugas patch or ALC883 driver on install DVD SATA & IDE: SATA works, IDE not tested LAN doesn't work. Onboard WiFi works For some people, install the new kernel before the update EFI & Vanilla Kernel No. LAN doesn't work P5K Intel P35 + ICH9 Install Method: Kalway 10.5.1 - upgraded to 10.5.2 BIOS Version: Unknown; Revision: Unknown Audio: Using onboard with ALC883 installer LAN works with this driver (maybe hangs after sleep) SATA & IDE: SATA works, in AHCI Mode Stable having flashed P5KR bios 403 on P5K using AFMotherboard ModelUDOS /N to force ICH9 into AHCI mode Now running for week stable with MAXMEM = 3072 in boot.plist, kept crashing without this option with 4GIG of RAM EFI & Vanilla Kernel Audio and LAN need patching P5K EPU Intel P35 + ICH9 Install Method: Kalway 10.5.2 BIOS Version:; Revision: Unknown Audio: Using onboard with ALC883 installer. Inline/mic don't work, 5.1 channels works. All channels works with AppleHDA patcher method. LAN: OOB SATA : OOB FireWire : OOB USB : OOB for all 8 USB ports Optical Drive: sata Samsung generic DVD-R Shutdown and reboot work, sleep freeze on wake up. Only tested with Vanilla 4Gb ram with no problem. Mixing PS/2 keyboard and USB mouse with no problem. Yes No, sound need patching, use AppleHDA patcher to get all channels input and output. P5K PRO Intel P35 + ICH9R Install Method: Leo4all v.3 and Kalyway 10.5.3 combo update BIOS Version:0806 BIOS setting: no changes needed, standard Audio: Realtek ALC883 - functional with 883 driver and patched kernel LAN: Marvell 88E8056 - functional using SKGE driver SATA & IDE: This board uses Marvell IDE driver, so you need to instal both drivers for Intel ICHx chipsets and "VIA Sis Marvell and SB chipset driver". Optical Drive: LG multi format drive on IDE, no problem USB - works OOB Do shutdown, reboot and sleep work? With Vanilla kernel yes, with patched kernel no. But Vanilla has problem with Core 2 Quad processor. Yes Almost everything works OOB, with patched kernel does not work power management. P5K SE Intel P35 + ICH9 Install Method: Kalyway 10.5.2 and 10.5.3 Combo Updater BIOS: 1008, standard settings CPU: manual overclocking possible (45 nm CPU tested) Audio: select alc883 kext during install (only tested analog stereo line-out, line-in an mic in: works). LAN: Onboard LAN requires installation of the DaemonES/MadInt driver/package. If you put your computer to sleep, onboard LAN stops working at wake up. It works again after rebooting. PCI-card Realtek RTL8169 works out of box; D-Link DGE530T 1GigE with skge-e.kext (Driver from D-Link website doesn't work). SATA: SATA works alright out of the box (as long as you don't enable SATA RAID). IDE (and possibly E-SATA) - Marvell chip 88SE61xx - needs patching: Marvell and others ATA kext for Leopard, by podarok - works after patch but crashes sometimes during trys to burn a DVD with Toast. USB: Works without problems USB Booting: Functional, at least after installing with internal SATA connection. Bear in mind that your system may lock up if power settings are configured to turn the HDD off after a certain period of inactivity. Optical Drive: IDE, SATA, and USB Optical Drives are supported. Yes No: both onboard LAN and IDE require patching. P5E-VM HDMI Intel G35 & ICH9R Install Method: Kalway 10.5.2 BIOS Version: 0506 Onboard Audio works - ALC 883 (S/PDIF not tested yet) Onboard Firewire works - VIA VT6308P Onboard Video (x3500) works but not accelerated VESA 3.0 Onboard SATA works, PATA not tested HDMI Output not tested yet Onboard LAN does not work OOB - Atheros L1 PCI-E Gigabit works with DaemonES/MadInt driver/package. Onboard RAID does not work out of the box Shutdown and Reboot works perfectly, Sleep does not work Startup welcome movie works USB 2.0 ports working (BIOS: Advanced > USB Configuration > Bios EHCI Hands-off "disabled") Used Vanila Kernel EFI working Everything but LAN is working P5E-VM DO Intel Q35 + ICH9DO Install Method: Kalyeay Leopard 10.5.1, manual Update 10.5.2 kalyway combo update, BIOS revision: latest, BIOS settings for stock/vanilla kernel with sleep mode bit problem]) Audio: Realtek® ALC883, 8-channel High-Definition Audio CODEC: works out of the box, some problem after 10.5.2 LAN: Intel® 82566DM PCIe Gigabit LAN controller: not work patch unavailable SATA: works out of the box IDE: no test onboard USB to front:works out of the box onboard USB to back: works out of the box onboard Intel® Graphics Media Accelerator 3100 (Intel® GMA 3100) integrated: not used) no kernel vanilla patch apply and works well some problem with network card intel pro 100 auto disconnect after computer stan-by usb device storage auto unmount. Running stable in the end! P5K-VM Intel G33 + ICH9 Install Method: Kalyway 10.5.2, manual 10.5.3 Kalyway combo update (works), apple 10.5.4 update works BIOS 803: latest, BIOS settings standard CPU: Overclocking no problem (Wolfdale) RAM: 8 GB (4 x 2 GB) DDR2 800 MHz recognized Audio: Realtek® ALC883, 8-channel High-Definition Audio CODEC: analogue works out of the box (selected during install, only stereo tested), can't get the front audio panel to work (neither digital nor AC97) LAN: Marvell88E8056® PCI-E Gigabit LAN controller: works out of box. I had to use EFI String to get TimeMachine to work, because it can't find the MAC address. SATA: All 4 ports work out of the box *need to set SATA mode to AHCI in bios* IDE: JMicron® JMB368 works out of the box USB: works out of the box. I had to disable PCGenUSB in Kalyway installation to get USB Mass Storage working properly Firewire: works out of the box onboard Intel® Graphics Media Accelerator 3100 works. With Apple graphics update I tested 1600x1200x32, but resolution must be set with Kernel parameter at boot. Software RAID is working using Chameleon Yes near 100% working out of the box, sometimes does not completely shut down P5B SE Intel P965 + ICH8 Install Method: Kalyway 10.5.2 BIOS Version: 0302 Audio: Onboard, AzaliaAudio.pkg only 2ch stereo is working LAN: Onboard, Attansic L1 Ethernet SATA & IDE: SATA works, IDE not testd, can't add another drive Optical Drive: HP1070, work out of the box. Originally tried to install with an old ide dvd drive. had to use a SATA shutdown does not shutdown completely. restart works, sleep not tested firewire pci card works out of the box BOOT.EFI.V80 P5B Deluxe Intel P965 + ICH8R Install Method: Kalyway 10.5.1, Upgrade: Kalyway_Hack_10.5.2ComboUpdate ComboUpdate method, be prepared for several lengthy reboots. Relax & just let it run. P5B Deluxe BIOS Ver.1226 Audio: AD1988B 8-channel High Definition Audio still not working after update (patches not tested) JMicron JMB363 SATA / PATA controller NOT TESTED (2 x External SATA 3.0 Gb/s ports) Intel Matrix Storage Technology (RAID) controller not recognized by OS X All six (6) SATA 3.0 Gb/s internal ports tested working in ACHI (after upgrade) IDE mode NOT TESTED Marvell Gigabit LAN Port 1 working; Port 2 still not working (patch not tested) All ten (10) USB 2.0 ports working All PCI Slots working Both (2) FireWire ports working (TI 1394a controller) Partitioned as MBR using EFI bootloader TimeMachine working Software RAID drives created w/ DiskUtility still working fine after upgrade EFI v8 + Vanilla Kernel No; Onboard Audio and LAN port 2 need patches P5B-E Plus Intel P965 + ICH8R Install Method: Kalyway 10.5.2 BIOS Ver. 0627/0633 Audio: AD1988B 8-channel HD Audio only in Stereo (default patches in Kalyway custom install; BIOS: Advanced > Onboard Devices Configuration > Front Panel Support Type "AC97") Internal SATA (x6) ports working in ACHI and RAID JMicron JMB363 SATA in AHCI (not PATA) IDE mode not tested Marvell Gigabit LAN Port working (default patches in Kalyway custom install) USB 2.0 ports working (BIOS: Advanced > USB Configuration > Bios EHCI Hands-off "disabled") FireWire (kernel/System.kext versions must match) Partitioned as MBR with EFI v.8; GUID works as well TimeMachine works Note: Does not wake up from sleep. MBR + EFI + Vanilla Kernel, GUID + Kabyl Not quite, but close; Onboard 7.1 Audio only in stereo P5B PLUS Intel P965 + ICH8 Install method: Kalyway 1.5.1 + Kalyway Combo update Onboard audio: Working (With Kalyway audio patch) Onboard LAN: not Working Sata: full working IDE: Works after Install. For boot Sata drive needed. Video: Working with Kalyway Nvinject. EFI v8 working. Vanilla 9.2.0 working. Audio needs Azalia patch P5GC-MX Intel P965 + ICH8 HD fresh install with GUID using Disc Utility iATKOS v1.0i SSE3 with vanilla kernel 10.5.1 Used PC_EFIv8 for GUID booting Updated to 10.5.2 using the original Apple combo update but using Devil's procedure on insanelymac Onboard LAN work with driver, download the driver here Audio works with HDAPatcher ALC883. YES Audio needs patching, and need a LAN driver . P5B Intel P965 + ICH8 Install Method: Kalyway 10.5.1, ComboUpdate + Kernel Patches applied in 10.5.1 or "Onetracks perfect install" works with ToH RC2 which is a lot of work BIOS: Unknown Audio: works after upgrade, needs patch in 10.5.1 Storage: ACHI working; Install from IDE not working, install to IDE unknown LAN: Working Partitioned as MBR using EFI bootloader Onetrack: Audio: Needs editing or patching AppleAzaliaAudio.Kext, audio in not supported LAN: Works OOB SATA & IDE: Works OOB (JMicron IDE works OTB with Kalyways install Disc, otherwise JmicronATA.kext needs editing) EFI & Vanilla Kernel No, Patches applied in 10.5.1 P5KPL-AM Intel G31 ICH7 Install Method: iAKTOs_5i Audio: works OOB Realtek RTL8102EL 100/10 LAN : need driver here SATA, PATA both works USB: all working Everything work great after 10.5.6 apple update through "software update" no need change or modify anything LIKE A REAL MAC EFI working, Vanilla works Yes. need LAN driver. P5KPL-AM Intel G31 ICH7 Install Method: Kalyway 10.5.2 Audio: works OOB, only stereo, no mic support. Realtek works OOB SATA, PATA works OOB USB: all ports working OOB Video: works OOB (no CI and no QE) Sleep, restart, shutdown: Working Firewire: not tested EFI working, Vanilla works Yes, everything OOB. P5KPL-VM Intel G31 + ICH7 Install Method: Kalyway 10.5.1, Combo Updater, Netkas method Bios release: 303 Audio work LAN Attansic/Atheros L1 work with DaemonES/MadInt driver GMA3100 Onboard Video: doesn't work System Profiler unstable (Need patch from 10.4.10) PC_EFI_V8 + Grub, Vanilla Kernel No P5KPL-CM Intel G31 + ICH7 Install Method: Kalyway 10.5.2 (boot with -x) Bios release: ??? PS/2 - working with most recent fix SATA - working perfectly, 4 channels PATA - working perrfectly, both channels Audio - Stereo Out only with AppleAzalia (patched) LAN - Atheros not working - using PCI 8139D (no drivers) GMA3100 Onboard Video: doesn't work System Profiler working perfectly - all values correct Sleep/Hibernate - never works - fan always on PC_EFI_V8 No P5WD2 Premium Intel 955X + ICH7R Install Method: ToH 10.5 > Apple combo 10.5.1 + ToH 10.5.1 kernel > Apple combo 10.5.2 via this guide + ToH 10.5.2 kernel BIOS Version: 0802 (latest available); Revision: beta Audio: Realtek ALC882 - works with Taruga 1.2 patch LAN: Intel PCIe Gigabit LAN Controller (integrated) - works OTB; Marvell 88E8001 Gigabit LAN Controller (integrated) - turned off & not tested FireWire: Texas Instruments 1394a controller (integrated) - works OTB IDE: works OTB; ITE IDE controller (integrated) - turned off & not tested SATA: works OTB; Silicon Image 3132 SATA controller (integrated) - turned off & not tested Asus WiFi-TV PCI card (optional) - not work EFI v8 works Audio needs patching P5WD2 Premium Intel 955X + ICH7R Install Method: Kalyway_10.5.2_DVD_Intel_AMD; kernel_9.2_speedstep; NVinject-256. Audio: Realtek ALC882 Disabled in BIOS during install, but installed drivers anyway. When system working well, enabled HD audio in BIOS, and it worked. I call that working OTB LAN: Intel PCIe Gigabit LAN Controller - works OTB; Marvell 88E8001 Gigabit LAN Controller disabled and not tested FireWire: works OTB IDE: disabled and not tested SATA: works OTB; Silicon Image 3132 SATA controller - disabled and not tested EFI v8 works. Vanilla Kernel will NOT work. Yes, so far P5B-MX Intel 946GZ + ICH7 Install Method: Kalyway 10.5.2 BIOS Version: 0605; Revision: Audio: Audio works with AZALIA by skippyretard Onboard video: Not working (causes kernel panic). LAN: Works with Attansic driver by DaemonES & MadInt SATA & IDE: Both working Requires MBR EFI & Vanilla Kernel Audio and network needs patching, and onboard video panics system. P5GC-MX/1333 Intel 945GC + ICH7 Install Method 1: Upgraded from Kalyway 10.5.1 to 10.5.2 using /"kalyway_hack_10.5.2ComboUpdate/"; Install Method 2: 10.5.1 retail DVD install with assistance of Boot132 CD (by Kalyway) and then Kalyway 10.5.2 updater Onboard LAN: Works with the driver, available for download here. PS2 mouse an Keyboard: works out of the box. SATA: works out of the box. IDE: works out of the box. onboard USB works out of the box. Power off, sleep: work with proper USB and monitor pin configurations Audio works with HDAPatcher ALC883. Onboard Video: works at 1024x768 default (but needs patching to get better resolution) YES Audio needs patching, onboard video needs patching, and LAN needs a driver. P5LD2-VM DH Intel 945G + ICH7 Install Method: Leopard retail DVD using BrazilMac's way, normal Autoupdates, manual Update to 10.5.2 (Netkas' HowTo here) BIOS revision: 0702 (BIOS settings for stock/vanilla kernel with sleep mode explained here) Audio: ALC 882 chipset (Works with patch found here) LAN: works out of the box SATA: works out of the box IDE: works out of the box onboard USB to front: does not work onboard USB to back: works out of the box onboard GMA950 graphics: works out of the box (and sleeps! But is analog only! Get a Sapphire ATI HD 2600 XT for this Board :-) ) Netkas' PC EFI V8 required to use vanilla/stock kernels 99% working out of the box, besides audio (see left). Running very stable in the end! P5LD2-VM SE Intel® 945G + ICH7 Install Method: Retail DVD & web update to 10.5.2(Netkas Method) BIOS Version: 0602 Audio ALC 882: Works with patch LAN: Works out of the box SATA & IDE: Works out of the box PC-EFI-V8 + Vanilla Kernel work Audio needs Patching, and couple of kext removed/replaced. P5AD2-E Premium Intel 925XE Install Method: Kalway 10.5.1 Audio: Onboard via Azalia Out LAN: Works, WiFi untested SATA & IDE: SATA works, IDE unknown Kalyway 10.5.1+ 10.5.2 upgrade P5GPL-X SE Intel 915PL + ICH6 Install method: Kalyway 10.5.1, Kalyway 10.5.2 Combo Updater & Kernel Patch BIOS Version: 0301 Audio: ADI1986A - use AppleAzaliaAudio.kext from JaS 10.4.8 DVD (Kalyway 10.5.1 version did not work) LAN: Marvell Yukon 88E8001 - use Marvell Yukon 88E8001 driver SATA & IDE - both work by default PC EFI (MBR) works, Vanilla Kernel does not No, LAN and Audio Output need patching P5P800 865PE Install Method: Kalyway 10.5.2 DVD BIOS Version:; Revision: Audio: Works LAN: Works, no jumbo frames SATA & IDE: SATA unknown, IDE works Optical Drive: LG DVD_RW, works Shutdown & Reboot works, Sleep works, but sometimes fail No With appropriate drivers selected @ installation, the only patch you should find is kalyway 10-5-2 usb patch. P4PE-X/TE 845PE Installed using JaS 10.5.4 Client/Server Audio: Editing proper kext did not help no sound ADI1888 Ethernet: works with Installed Patch USB & ATA work using Patches from JaS DVD Using Cemeleon EFI, Using 9.2.0 ToH kernel (SSE2) No Striker II Formula NVIDIA nForce 780i SLI Install Method: Kalyway 10.5.2 Bios Version: 1303 (2008/05/16) Audio: 2 Speaker,Digital Out and Mic Works (AD1988b_rev3_Installer) Lan: not working SATA & IDE: works FireWire: works EFI v8 Works No, overall system is too unstable Striker Extreme NVIDIA nForce 680i SLI Install Method: Kalyway Update combo 10.5.2 + 10.5.2 SSE3 kernel update to fix boot delay and black screen, efi MBR BIOS Version:1401 Audio: SoundMax AD 1988B, working stereo only, no input with AzaliaAudio.pkg installer LAN: Marvell Yukon 88E8039, working with nforcedeath, both nics, all CPUs enabled, unstable under load SATA & IDE: Does SATA work? Both working flawlessly out of the box (10.5.1 and 10.5.2) Optical Drive: Both IDE and SATA drives working. Both optical drives LiteOn models DVD burners Shutdown, reboot work flawlessly, sleep hangs computer after update to 10.5.2 Video card GeForce 7600GT working Quartz Extreme with latest nvinject 0.2.1 had to edit NVDAResman.kext,NVDANV40.HAL,NVDANV30.HAL with device specific ID and remove all other device ID's Not tested LAN and Audio P5N32-E SLI Plus NVidia nForce 680i SLI Install Method: Kalyway 10.5.2 and 10.5.3 Combo Update Package by Mysticus v1.3 CPU: Core 2 Quad Q6600 had to edit about this mac strings file to show that in the about this mac window Audio: Worked for me OOB, with Kalyway 10.5.2 install disk (on the default driver install setup). LAN: Onboard LAN requires installation of the forcedeth driver still doesn't work though, shows as always being unplugged used a D-Link DFE-530TX+ PCI Adapter and that worked fine SATA: SATA works alright out of the box (as long as you don't enable SATA RAID) but freezes sometimes suspects it's because the nforce drivers are still buggy UPDATE: if your system has more than 3 GB of RAM, see if booting with the kernel param 'maxmem=3072' fixes the problem. [Using Kalyway 10.5.2, at least, it fixed the problem on at least one system. Perhaps the SATA driver only uses 32-bit addressing for DMA???] IDE: works USB 1 and 2: works but not able to mount usb drives until after you install the 10.5.3 combo update, don't select PCUSBGen fix, not needed USB Booting: not sure Optical Drive: SATA and USB Optical Drives are supported after 10.5.3 combo update installed Graphics: Nvidia 8600GTS 256 MB with nvinject 256 option selected with full Quarts Extreme and Core Image support (QE/CI) Nvidia 8800GT 512MB; works with full support with Nvinject 512, with dual monitors. No: select nforce kernel 9.2.0 following guide posted with efi enabled and when using combo update of 10.5.3 No AMD CPU M3A78-T AMD 790GX+SB750 Install Method: iDeneb 10.5.5 BIOS setup options: Enabled AHCI BIOS Version: 602 Audio: Works , Realtek ALC1200 (AppleAzaliaAudio) WORK PERFECT FOR ME. But if you have problems you can use this Kext [ Network: Onboard Marvell 88E8056 Gigabite LAN. Working Perfect SATA HD and DVD ROM: Work Perfect USB: all working Firewire: Not Tested EFI v8 Works Audio and LAN Working Perfect M3N-HD/HDMI Nvidia nForce 750a SLI Install Method: Kalyway 10.5.2 BIOS setup options: Enabled AHCI BIOS Version: 1301 Audio: Works , Realtek ALC1200 (AppleAzaliaAudio) use this Kext [ Network: Onboard Atheros F1 Phy Gigabit (Not Tested) Belkin G Plus MIMO USB Network Adapter (RUN PERFECT) SATA & IDE: Work Perfect USB: all working Firewire: Not Tested EFI v8 Works LAN no tested but Belkin G Plus MIMO USB Network Adapter Run Perfect, Audio Works , Realtek ALC1200 (AppleAzaliaAudio device id modificate) Crosshair AM2 NVIDIA nFocre 590 SLI MCP55 Install Method: Zephroth AMD SSE3 9.2.0 Kernel BIOS Version: 0702; Revision: Unknown Audio: Works with AzailiaHD from install DVD LAN: Doesn't Work - OSX detects them with Forcedeth and they have MAC addresses however they will not detect Ethernet cables SATA & IDE: Both Work To avoid "Still Waiting for root device," have an IDE HD and optical drive plugged in and install on SATA Needs boot hang fix if using GUID - same as Asus A8N-E NFORCE4 EFI v8 Works LAN doesn't work, Audio needs patching (reinstall AzailiaHD after 1st boot) M2N-E NVIDIA nForce 570 Ultra MCP Install Method: LEO4ALL v3 10.5.2 AMD SSE3 9.2.2 Kernel . BIOS Version: 1202; Revision: Unknown. Audio: ADI 1988 HD Audio Device; works with Azalia driver installed from dvd. LAN: Not tested. SATA & IDE: SATA works with Nforce Test driver from dvd; IDE Not tested. EFI Worked. No, audio,sata needs patching,slow boot (aprox. 3-4 minutes) . M2N-X NVIDIA nForce 520 MCP Install Method: Kalyway 10.5.2 AMD SSE3 Sleepykernel . BIOS Version: 0701; Revision: Unknown. Audio: MCP65 HDA, line out works perfectly with AppleHDA removed and device/vendor IDS added to AzaliaAudo kext LAN: Not tested. SATA & IDE: SATA works with Nforce MeDevil driver from dvd; IDE works perfectly. EFI Worked. No, audio,sata and AMD patch 1 used, but all required patches apart from audio already on disk. M2N32-SLI Deluxe Nforce 590 SLI MCP Install Method: Leo4All-10.5.2 PPFv1 Universal AMD/INTELSSE2/SSE3 9.2.0 Kernel BIOS Version: 1802; Revision: Unknown Audio: ADI AD1988B SoundMAX, Azaila Driver From DVD LAN: Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0e (Integrated), RTL8187 Driver From DVD SATA & IDE: It Will Install On IDE or SATA Optical Drive: SATA LG DVD Burner | Had to hook up IDE DVD-Rom to install (removed IDE Rom after install and everything works fine) AMD-Patch From DVD EFI Worked The integrated LAN does not work out of the box. (Did not try to fix this, because on board wireless worked with patches applied during install. No post-install patches applied. M2N-E SLI NVIDIA nForce 500 SLI MCP Install Method: Zephyroth 10.5.2 AMD SSE3 9.2.0 Kernel BIOS Version: 0902; Revision: Unknown Audio: C-Media 6501 HD Audio Device; works out of the box, recognised as USB Audio Device LAN: Works with nForce 2/3/4/5 drivers selected in install options. SATA & IDE: SATA works (can do flat install to SATA HDD); IDE Works EFI v8 Works No, lan needs patching M2N SLI Deluxe NVIDIA nForce 570 SLI MCP Install Method: Kalyway 10.5.2 AMD BIOS Version: 1604; Revision: Unknown Audio: SoundMAX ADI AD1988B; Stereo works have not tested surround, Not recognized LAN: Nvidia nForce 570 MCP built in dual Gigabit with Marvell PHY works with (nForceLAN.kext) SATA & IDE: SATA works (can do flat install to SATA HDD); IDE Works Despite being able to setup RAID before OS even starts up. It does not recognize the array. EFI v8 Works Video (PNY 7600GT 256mb) worked but for full support I had to download and install NVinject despite it being installed from DVD. M2N-X Plus NVIDIA nForce 430 Install Method: Leo4Allv3 10.5.2 Universal SSE2 SSE3 BIOS Version: Stock Audio: High Definition Audio Azalia (Installed Azalia Driver) LAN: Not tested. SATA & IDE: SATA Working fine without other packages. Not tested PATA. Optical Drive: LG H50N. Working w/o other packages Shutdown and restart worked, sleep not tested Was looping on the welcome screen (When comes after the backup screen, back to the welcome video). Resolved Typing -s at the Darwin boot prompt and following: $/sbin/mount -uw / $passwd root it will ask you to enter a new password $touch /var/db/.AppleSetupDone $reboot EFI ran smooth, Installed 9.2.2 Kernel in a Seagate 160Gb SATA HDD Using MBR to Boot (As default) Yes, but LAN (not tested yet) A8N-SLI NVIDIA nForce4 SLI Install Method: Zephyroth 10.5.2 BIOS Version: 1604; Revision: Beta Audio: Realtek ALC850 (Selected AC'97 from Customize list) LAN: nForce4 built-in Gbit MAC (Selected forcedeth from Customize list) SATA & IDE: Installed OS onto IDE drive without problems. Also have two SATA drives in Striped RAID configured through MediaShield ROM, but the RAID showed up as two individual drives in Mac's Disk Utility during installation. Cannot access RAID even after installation. Optical Drive: BenQ DW1625. During the 15 odd times I booted from the DVD to install, after the first 6 or 7 times, the installer started saying that it could not read from the disc. This was happening when it normally would check the media for errors. So, I re-burned a new disc using the same drive of the same ISO(which I had initially created from the original (now problematic) disk). The new disc worked. Maybe, just a very fragile disc. But, weird. Shutdown and reboot works. Sleep gives a blank (black), unresponsive screen. Have to hard reset. Had to run the installation, with the same options, multiple times for it to get it right. After a few installs, I was getting the gray screen asking me to restart the computer. I really don't know how I got around that problem. I just installed again without changing any options. Finally, when it worked, I had my ethernet cable unplugged. In the Customize list, I had chosen the nforce chipset 2/3/4/5 kext, AC '97, forcedeth, nvidia geforce 10.5.2 and nvinject 128 MB for my 6600GT graphics card. Name of volume: Leopard. I chose the EFI v8 plus MBR bootloader to make the "Leopard" volume bootable. I'm using grub to choose between my various OSes. SSE3 9.2.0 TOH Kernel chosen from the Customize list. Can only install from same IDE cable (CD and HDD) EFI: Since I installed using Zephyroth's 10.5.2, I'm assuming it installs EFI by default? Yes, everything works without patching. No flags needed while booting. A8N-E nForce 4 Install Method: Leopard 10.5.2 Zephyroth AMD BIOS Version: Unknown; Revision: Unknown Audio: Install AC97 package on the install menu LAN: Install Forcedeth from the install menu SATA & IDE: IDE works; SATA not tested Install Boot Hang Fix: Boot with the DVD Press F8, then type "-s" Type "cd /usr/standalone/i386" Type "dd if=./guid/boot1h of=/dev/rdiskXsY bs=512 count=1" (X is the disk number and Y is the partition number on which you installed Leo) Type "dd if=./guid/boot0 of=/dev/diskX bs=400 count=1" Type "./startupfiletool -v /dev/diskXsY ./boot_v8" EFI v8 Works Audio & LAN need patching A8N5X NVIDIA nForce4 Install Method: Kalway 10.5.2 BIOS Version: 0902 Nvidia 6600 PCIe working with NVinject Chose patches: SSE2_Jas1048_ACPI_APIC, AMD_1052_Patch_test_1, and -legacy flag Startup welcome movie played with sound on first boot EFI working Everything but LAN is working A8N-VM NVIDIA nForce 410 Install Method: Zephyroth Leopard 10.5.2 for AMD BIOS Version: 0902; Revision: Unknown Audio: ADI AD1986A works with ALC888 patch and no input LAN: Works with Zephyroth patch in installation SATA & IDE: Works with Zephyroth patch in installation partitioned as MBR EFI works Audio & LAN need patching M2NPV-VM nForce430/GeForce 6150 LEO4ALL V2 KALYWAY & ZEPHYROTH Disable usb legacy support in bios to work with ps/2 mouse & keyboard Graphics working but no qe/ci (install macvidia or remove nvdaresman.kext) Audio Working with 2 channel output but no input Lan Working SATA Working link installation guide for all osx86 Everything working fine but no qe/ci P5V-VM Ultra VIA P4M890 Install Method: Kalyway 10.5.1, Combo Updater, & Kernel Patch BIOS Version: Unknown; Revision: Unknown Audio: Realtek High Definition Audio, ADI AD1986A Soundmax Codec LAN: Realtek RTL8201CL SATA & IDE: Unknown Unknown Audio needs patching P5VD2-MX VIA P4M890 Install Method: Kalyway 10.5.1, Combo Updater, & Kernel Patch BIOS Version: 1017; Revision: Unknown Audio: ADI1986A; works with Azalia LAN: Realtek RTL8201CL; works with viarhine.kext SATA & IDE: IDE works; SATA needs patching to appleviaata.kext and add 0x53371106 0x2363197B to the device ID Shutdown & Restart fully working, Sleep not tested Unknown No, audio & lan need patching K8V SE Deluxe VIA K8T800 (VT8237) Install Method: Kalyway 10.5.2 (-x -v -legacy options) BIOS Version: 1001 ; Revision: Unknown Audio: ADI AD1980 SoundMAX (integrated) - does not work, used drivers for PCI Creative card LAN: Marvell Yukon 8E8001 (integrated) - works with m.musashi beta driver SATA & PATA: Works out of the box Optical: Rosewill 16X8 DVD DUAL working, Lite-On LTR-52327S CD-RW working Shutdown and reboot work, sleep unknown USB: Seen in system profiler, will not mount devices Unknown No, Audio, LAN, and USB need patching. K8V-X VIA K8T800 (VT8383) Install Method: Kalyway 10.5.2 AMD > SSE2 BIOS Version: 1001.006 Audio: ADI AD1980 SoundMAX (integrated) - seems to work but problem with stereo output LAN: Marvell Yukon 88E8001 (integrated) - works fine with skge.kext (on Kalyway DVD at installation) Untested No, Audio not working 100% K8V-XE VIA K8T890 Install Method: Zephyroth 10.5.2 AMD > SSE3 9.2.0 kernel after Uphuck 10.4.9 1.4a drivers install (USB, Azalia, VIA Rhine) BIOS Version: 0703 Audio: Realtek ALC660 (integrated) - works with Uphuck Azalia patch (not Zephyroth patch) LAN: Realtek RTL8201CL-LF 10/100M (integrated) - works with Uphuck VIA Rhine driver IDE: VIA IDE controller (integrated) - works with Zephyroth VIA drivers SATA: JMicron JMB 363 SATA controller (integrated) - used as storage drive Video: NV 7300GT works with NVInstaller V41 Install Boot Hang Fix: Boot with the DVD Press F8, then type "-s" Type "cd /usr/standalone/i386" Type "dd if=./guid/boot1h of=/dev/rdiskXsY bs=512 count=1" (X is the disk number and Y is the partition number on which you installed Leo) Type "dd if=./guid/boot0 of=/dev/diskX bs=400 count=1" Type "./startupfiletool -v /dev/diskXsY ./boot_v8" EFI MBR works Audio & LAN need patching M2A-VM VIA SB600 / ATi 690g LEO4ALL V3, default kernel in DVD installer - - On AMD 4600+ x2 CPU Motherboard BIOS version 1501 Audio, LAN, SATA 100% out of box SATA DVD install works out of box IDE DVD-RW (ATA) working with dcat's kext (search Insanelymac.com) nVidia Geforce 8600 GT 256mb (works fully with NVInject 0.2.0, using this method Had to switch SATA controller to AHCI in BIOS. Warning: Switch this back to IDE if you installed Windows XP on another drive. If you use PS/2 Keyboard and Mouse (instead of USB) disable USB legacy support in BIOS Setup. N/A Everything works 100%, the onboard ATi x1250 card works with Kalyway, probably with LEO4ALL as well. M2A-VM HDMI VIA SB600 / ATI 690G Kalyway 10.5.2, Kernels installed: sleepkernel,speedstep - - On AMD 4200+ Athlon X2 CPU Motherboard M2A-VM HDMI - No BIOS updates done If you have old PS/2 mouse and keyboard - Disable USB Legacy support in BIOS LAN, SATA, IDE works 100% out of box IDE DVD install on a IDE primary HDD with a SATA secondary drive XFX nVidia Geforce 8500 GT 512mb (works like a dream with NVInject 512 selected during install) Viewsonic 19' DVI - able to get full native resolution 1440x900@75Hz Had to switch SATA controller to AHCI in BIOS. Warning: Switch this back to IDE if you installed Windows XP on another drive. Install takes roughly 2 hours. Shutdown and Sleep are working. EFI works, Vanilla not supported Near perfect combo, Only audio needed patching (Simple installer file available in forum-search ALC882 patch) M2S-X SiS 756 Northbridge + SiS 965L Southbridge Install Method: Kalyway 10.5.2 Intel/AMD BIOS Version: 0603 Audio: Works OOB no patch needed since onboard C-Media CM6501 8 ch audio is a USB PnP Audio Device detected as PnP Audio Device by the OS [ LAN: SiS 190 10/100 Ethernet does not work, installed a cheap Realtek 8139 PCI LAN Card works OOB. IDE: OOB Full UDMA Speed SATA: Not yet tested USB: Has Issues need to connect USB Devices before turning on the system and can't eject a USB Flash Storage Device. Need to Disabled Legacy USB Devices in BIOS. Installed using IDE Drive EFI Works no Vanilla Kernel No P5SD2-FM SiS 649DX/SiS 966 chipset Install Method: Flat Image, ToH Kernel, Kalyway 10.5.2 Combo Update BIOS Version:; Revision: Audio: Works LAN: Works SATA & IDE: SATA unknown, IDE works Optical Drive: NEC DVD_RW ND-4551A works Shutdown & Reboot works, Sleep not tested Unknown Yes M2N68-AM NVIDIA nForce 630a/Geforce 7025 Install Method: Kalyway 10.5.2 Audio NOT working Network NOT working SATA: Works: Set to AHCI in BIOS PATA: works USB: NOT working Setup a FAT32 partition on the hardisk to transfer files/drivers Update: kernel: voodoo 9.5.0 Audio working 2 channels with voodooHDA, trying for 5.1 enabling onboard nForce gigabit works with forceDeth USB got activated after installing Maxtor Onetouch Firewire drive package for Mac! dont know how. Added Asus 9600GSO PCIE x16 512MB card and works with NVEnabler but not with EFI strings or GFX strings from Osx86tools(BTW, must have tool) None of the additional drivers have improved device supports on the onboard GPU. Tips: OS X enhanced graphics QE / CI wont work with onboard GPUs. have a few OSx partitions on dedicated HDD and use CarbonCopy to create clones as you step thru each successful hack M2N CM-DVI NVIDIA nForce 630a/Geforce 7025 WORK NO FULL Install Method: Kalyway 10.5.2 Audio working Network NOT TEST LAN SATA: Works: Set to AHCI in BIOS PATA: - USB: working, USB MODEM FULL WORKS VIDEO: ATI RADEON 3650 256MB WORKS FULL M3A78-EMH HDMI AMD 780G/ATISB700 Install Method: Ideneb v1.3 10.5.5 Audio working with Azalia Kext NETWORK: working after switching on bios rom set with RealtekR1000 kext SATA: working with AHCI in bios PATA: not tested USB: working fully VIDEO: Working with nvinject Geforce 8600GT 512MB SHUTDOWN, RESTART: works with shutdown patch SLEEP: not tested Memory 4GB 4x1GB Kingston P4V800-X VIA PT800 / VIA VT8237 Install Method: Kalyway 10.5.2 BIOS Version: Unknown; Revision: Unknown Audio: ADI AD1980 AC'97 kext LAN: No work SATA & IDE: Unknown SHUTDOWN, RESTART: working fully SLEEP: not tested Unknown Audio needs patching . . . [ Hardware Name Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch Biostar P35D2-A7 Intel P35 + ICH9 Installation: SATA HD fresh formatted with MBR using Disc Utility Install method: Kalyway 10.5.1; vanilla kernel (both pkgs) from SATA DVD Updated to 10.5.2 using the Kalyway 10.5.2 & Kalyway Kernel updates Onboard LAN works out of the box Audio works with Linux audio codec ALC662 + HDA Patcher. EFI v8 + Vanilla kernel No; Audio needs patching Biostar 945GC-M7 TE 945GC Installation: SATA HD fresh formatted with MBR using Disc Utility Install method: Leo4Allv2 Onboard LAN does not work out of the box Audio does not work out of the box Video GMA950 works out the box without patch (if patched hardware acceleration works but resolutions is stuck) Patched Kernel 9.0.0; also Vanilla Kernel No, audio and lan both need patching Biostar NF61S nVIDIA MCP61S(GeForce 6100/nForce 405) Install Method: Zephyroth AMD 10.5.2 Rev.1 BIOS Version:; Revision: Audio: Unknown LAN: Unknown SATA & IDE: Unknown Optical Drive: NEC 7191S SATA setup as IDE with IDE-SATA bidirect converter adapter (otherwise still waiting for root device message) Unknown Unknown Biostar P4M80-M4 VIA P4M800 Installation: IDE HD fresh formatted with GUID using Disc Utility Installation method: Kalyway 10.5.2 Onboard LAN needs Rhine kext NVidia GeForce 6200 needs Titan kext Patched Kernel LAN and GeForce patchs Biostar P4M890-M7-SE VIA P4M890 Northbridge / VT8237A Southbridge Installation: WD 320GB IDE HD fresh formatted w/2 partitions with GUID using Disc Utility Installation method: Kalyway 10.5.2 Intel Core2Duo E4300 OC'd to 2.4 GHz/Recognized as Core2Duo 2.4 GHz Onboard IDE works OOB SATA Not working - Doesn't see my SATA drive with Vista installed All USB ports (front & Rear) working / Mounts my external USB Hard Drive Full Burn support in all iApps with Pioneer DVD-RW (seen as Apple Supplied) Time Machine fully operational w/WD 80GB IDE drive Onboard LAN needs Rhine kext Onboard Audio needs AzaliaAudio.kext - 2-channel Audio but good 'nuff NVidia GeForce 8500GT needs Nvinject kext - Have QE/CI and all resolutions/Refresh Rates & DVI Shutdown / Restart / Sleep fully functional Been fully operational for a week now w/o a single hiccup Vanilla Kernel LAN, Audio and GeForce patchs Biostar 945GC Micro 775 945GC Install Method: iATKOS 2.0i Intel Core 2 Duo E2140 1.6GHz @ 1.84GHz (OC'd) Audio: Realtek ALC862 (working OOB) LAN: Realtek RTL8139 (working OOB) SATA working, IDE not tested Hitachi Deskstar 160GB SATA-II (Mac) & WD 250GB SATA-II (Vista) Shutdown & Reebot works - not waking after sleep USB Ports are working Stable as a rock EFI + Vanilla 8500GT - Used NVInject 0.2.0 Biostar P4M800-M7 VIA P4M800 Northbridge / VT8237 Southbridge Installation: WD 80GB IDE Installation method: leo4allv3 Intel Pentium IV 2,8 Ghz Onboard IDE works SATA Not tested USB ports (front & Rear) working LG DVD-RW Onboard LAN needs Rhine kext Onboard Audio needs patch (AC97)- in/out works NVidia GeForce 4mx 440 64mb AGP8x needs patch (Natit 1,0 installer) - No QE/ Software CI Samsung SyncMaster 206NW - full supported No vanilla kernel LAN, Audio and GeForce patchs Biostar P4M800 Pro-M7 VIA P4M800 Pro Northbridge / VT8237R Plus Southbridge Installation method: Kalyway 10.5.2 Intel Celeron D 336 Onboard IDE Not Tested SATA Working USB ports (front & Rear) working SATA DVD-RW Onboard LAN Works Out of The Box (Realtek RTL8201 Chip) Onboard Audio (ALC655) works but in MONO mode. Solution here. Onboard VGA Works (VIA S3 Unichrome) but doesn't support Quartz Extreme. Only Allows 1024 X 768 as screen resolution. Follow this thread to change the resolution. No vanilla kernel Audio patch Biostar TF7025-M2 Chipset (NVIDIA 7025 and Unknown) Install Method: SpeedStepKernel + Kalyway Audio: Nvidia AC'97 on Kalyway DVD Onboard LAN needs R1000.kext Some revisions of board use Nvidia MCP67 LAN, not Realtek. Working using forcedeth-nockd.kext with deviceID 054c10de manually added to the info.plist SATA: AHCI mode works for hard drives and DVD drives PATA: Optical drive works, but hard drives larger than 128 GB do not Optical Drive: NEC Optiarc DVD Burner Shutdown and restart works. Sleep works, but causes weird problems with X1950 Pro video card. Onboard video does not work No vanilla kernel LAN, Audio Patches, Use USB fix 1.3.mpkg to fix usb hotplug support Biostar TForce 945P Intel 945P + ICH7 Installation: SATA DVD, PATA HD Install method: iAtkos 2.0i, vanilla kernel Onboard LAN (RTL 8110SC) works out of the box Audio (ALC655) Fixed with a plist edit. EFI v8 + Vanilla kernel No; Audio needs patching Biostar GF8100 M2+ SE NForce 720a (AMD board) Installation: SATA HD (MUST use AHCI mode or Disk Utility won't see drives) Install method: Kalyway 10.5.2, AMD patches and kernel Onboard LAN: Realtek 8201CL -- add 0x076010de to Nforce kext Audio: ALC662, says it's AzaliaAudio in BIOS but does not work Video: Onboard GeForce 8100 shared memory does not work Patched Kernel No, LAN needs patch, for video and audio you will need supported PCIe/PCI cards TA690G AM2 AMD 690G Install: Zephyroth Leopard 10.5.2 for AMD EFI BIOS Version: R69AMC13 Audio needs patching [ Hardware Name Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch DFI X38 LT Intel X38 Install Method:: Quad boot portion: Installed XP Pro SP2 first (using acronis to hide other 3 partitions) than Vista (same hiding method) than osx86 than ubuntu with Grub. OSX86 Method: Kalyway 10.5.1 + Patched Kalyway Update 10.5.2 + Patched Kalyway Kernel 10.5.2 + Graphic Update BIOS Version: 1/11/08 Audio: Works with AppleHD patch and AC885 kext (2.1 and digital and input) Video: 8800GT works with Graphic update + nv... latest (google 8800gt osx86 download) LAN: Had to install off gigabyte p35 cd and edit for 8052 in the info.plist file SATA Support works with AHCI IDE Suppport works RAID w/ Areca 1210 Working (RAID 0) Yes. Fully supported EFI v8 + with Vanilla kernel LanParty NF4 Ultra-D nVidia nForce4 Ultra/SLI Chipset Install method: Zephyroth 10.5.2 Installation: IDE HD formatted with MBR using Disc Utility BIOS version: 2006/04/06 IDE: Works out of the box SATA: Select Nforce 2/3/4/5 chipset driver in install LAN: Select LAN drivers in install (Both Nforce & Marvell) Audio: Select ac'97 audio driver in install Total install time: 14 min EFI v8 + ToH 9.2.0 SSE3 kernel Yes, as long as you select the appropriate drivers in the installer LAN PARTY ULTRA-D nForce4 nForce 4 Install Method: Zephyroth 10.5.2 V1 for AMD & 9.1.0 Kernel BIOS Version: Unknown; Revision: Unknown Audio: ALC 850 works OOB LAN: Onboard nForce 4 works OOB SATA & IDE: Both work Optical Drive: LG GSA-H22N BK works Optical Drive 2: NEC 2510A works Shutdown & Restart works, sleep untested Socket 939 EFI works Yes LANPARTY UT CFX3200-DR/G Socket 939 ATI 580X + ULi 1575 Install Method: Kalyway 10.5.2 (need to edit AppleVIAATA.kext and add device values). Updated to 10.5.5 with ASU BIOS Version: Audio: ALC 882 works OOB (Selected P5WDH in Installer, use HDAEnabler.kext to get info in system profiler). USB: All ports working OOB. Firewire: Works OOB. LAN: Marvell 88E8053 Onboard Lan working OOB. LAN: Marvell 88E8052 Onboard Lan working after adding values to yukon2.kext. SATA & IDE: SATA and IDE both working with edited AppleVIAATA.kext Optical Drive: Working IDE Shutdown Works, Restart and Sleep don't. EFI works, using 9.5.0 VoodooXNU RC Kernel. Fully Working, but need to manually edit AppleVIAATA.kext on kalyway 10.5.2 install disk. [ Hardware Name Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch P4M800PRO-M (V1.0A) VIA P4M800PRO + VIA VT8237R Plus Install Method: Kalyway 10.5.2 with "sleep" kernel BIOS: Unknown (will update later) but I did not have to mess around with any settings to make it work. Audio: Realtek ALC655, only works on left channel out of the box. Use kext file from [and everything works great! Graphics: integrated video not tested; using AGP card (128MB Geforce 6600GT) with NVInject 128 which is working great. LAN: VIA VT6103L, does not work out of box. Attempted to install VIA Rhine driver, and adapter was recognized....but always got a kernel panic immediately after I tried to setup the adapter! Using a Realtek PCI network adapter instead, works great. I'm just a bit lazy, I am sure there's a way to get the integrated network to work if you really want to. SATA & IDE: Both work excellent out of the box! not sure? No, audio and network need to be patched. P4M800PRO-M V2 Via P4M800PRO, Via 8237R Plus Install Method: Use Kalyway 10.5.1 Intel Amd DVD. Use 10.5.6 combo update with netkas method. Netkas method works but you MUST enable root user in directory utility and type "sudo su" in terminal first before running the netkas script. Make sure you have voodoo kernel 9.5 installed BEFORE YOU REBOOT. If you have an nvidia card remove all ati*, appleintelgma* video kexts before reboot. IDeneb 10.5.5 also works but do not install any video drivers. BIOS: 5/25/2007 Audio: AC97 stereo fully working with patch, otherwise mono OOB. Graphics: Onboard video unknown. Used Geforce 6200 128mb AGP and 7600gs 512 AGP. QE CI supported with NVinject. LAN: Works with viarhine.kext, but has dropouts and you have to restart. Use wireless USB adapter. Even Fully supported PCI LAN cards Tends to drop out just like the on board, many people are having this problem just with this particular chipset no just the motherboard. Tried many things to get this to work but have not had success, some bios tweaks make it last longer but it still dies from heavy usage. SATA & IDE: IDE works, SATA works. USB Works. Time Machine works with toh ionetworkingfamily.kext. Vanilla kernels do not work because of via chipset. Installed using MBR. GUID works too on my IDE drive. Dual boots with XP. You might have to slightly increase voltage on your memory with this board. I could not install Kalyway 10.5.2 DVD at first and got an error "Could not validate Base Install". After upping my memory voltage by .20 it worked fine. Depends on memory probably. LAN dropouts even using a PCI Supported NIC. G31T-M Intel G31 + ICH7 Install Method: Leo4All_v3 (no other worked) BIOS Version: Unknown Audio: ALC662 (Only AzaliaOut), HDA-Patcher w/ ALC662.txt didn't work LAN: not tested SATA & IDE: no problems occured Optical Drive: positively tested with SATA & PATA drives Shutdown, reboot work OnboardGFX not tested Only worked with whether cpus=1 or ACPI disabled. Only one core recognized by OSX NOT RECOMMENDED UPDATE BY SEARAY: YOU CAN USE THIS BOARD WELL IF YOU APPLY BIOS PATCH. SEE 10.5.5 HCL for the fix. It works in 10.5.2 and 10.5.6 Yes No, Sound needs Patching GCT-M/1333 (V3.0) Intel 945GC + ICH7 Install Method: EFI_V8 + Retail DVD imaged to USB drive + patched. Updated to 10.5.2. BIOS: 07/11/07 (08/02/18 does not boot) Audio: IDT 92HD202: Not working yet. Graphics: 945G/P (GMA950): Working, no tearing / artifacts. LAN: RTL8101E: Works Native SATA & IDE: IDE works, SATA works. No optical drives tested. Yes Not tested GCT-M/1333 (V3.0) Intel 945GC + ICH7 Install Method: Kalyway 10.5.2, Vanilla BIOS: 07/11/07, must have Execute Disable Bit ENABLED Audio: Unknown for onboard, Using USB audio instead LAN: Works SATA & IDE: Works with either or both, including IDE Pioneer DVR-112D optical drive Graphics: Artifacts from onboard. Installed XFX8400GS PCIe with Kalyway NVInject option. Modified NVCAP for DVI. Shutdown, reboot work. Sleep does not. Cheap $20 Firewire and $20 AirLink Wireless N PCI cards work well. 2.67GHz Core 2 Duo E6750 Previous installs with Kalyway 10.5.1 were difficult. Kalyway 10.5.2 seems much easier for this mb. Yes Not tested GCT-M/1333 (V3.0) Intel 945GC + ICH7 Install Method: Kalyway 10.5.2, no options selected BIOS: 07/11/07, Execute Disable Bit ENABLED Audio: No, IDT 92HD202 HD Audio, previously Sigmatel 9200?, does not work in SLES 10 or Ubuntu 8.04 either LAN: Realtek 8101E, works natively SATA & IDE: IDE Maxtor HD and Emprex DVD 16x burner work, SATA not tested Graphics: Intel GMA 950, only 1024x768, no artifacts USB 2GB Jump drive works Shutdown, reboot work. Sleep does not. 2.2 GHz Core 2 Duo E2200, Crucial 2GB 800Mhz (detected as 667Mhz) PC6400 CL6 Yes Yes except Audio K8M890M-M (V1.0A) K8M890 + 237R Install Method: Zephyroth AMD 10.5.2, AC97, Via Rhine, MBR Bootloader options selected BIOS: 9/12/2007, American Megatrends Audio: AC97, works LAN: VIA Rhine, works with install option checked WLAN: Linksys WUSB54G, USB works with prasys drivers SATA & IDE: IDE Maxtor 34GB (works), SATA WD 160GB (works), IDELGDVDRW (not fully tested) Graphics: Sapphire X1650 Pro PCIe, no artifacts (sometimes multiple res & qe/ci when hacked. trouble.) Graphics: Onboard IGP S3, does not work. Shutdown, reboot work. Does not sleep. 2.2 GHz AMD Athlon 64 X2 AM2, Crucial 2GB 800Mhz (detected as 667Mhz) PC6400 Yes Yes, except onboard graphics and added vg/wlan cards. . [ Hardware Name Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch 945gct-m v 3.0 Intel 945GC + ICH7 Install Method: Kalyway 10.5.2 intel amd sse2 sse3 BIOS: latest Audio: No, Motu Ultralite used instead. LAN: works oob, SMB works thank god SATA & IDE: both work oob Graphics: e-vga nvidea 7300gs 256 mb ddr2, works with /movevideodrivers trick, crashes when 'detect displays'. all resolutions work, multiple displays not yet tested. USB 2.0 works Belkin firewire pci card works oob Shutdown, reboot work. VERY Slow comes with 512mb of patients 3.07 P4 w/ HT, Crucial 2GB 800Mhz (detected as 667Mhz) FSB running at 533 xbench score @ 99, with dashboard killed. Logic pro and Final Cut Express 4.0 work Yes Yes except Audio [ Hardware Name Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch eVGA 780i SLI132-CK-NF78-A1 nVidia nForce 780i SLI Chipset Install method: Kalyway 10.5.2 Installation: SATA HD w/ GUID BIOS version: P06 PATA: works (PATA optical disk work during installation) SATA: all ports work but unstable when writing/reading medium size files LAN: not working (beta driver work but unstable) Audio: ALC888S (works with ALC888 driver) EFI v8 + 9.2 sleep kernel No, sleep/shut down not working properly, system randomly freeze under idle/load eVGA 680i SLI122-CK-NF68-A1 nVidia nForce 680i SLI Chipset Install method: Kalyway 10.5.1 + Kalyway 10.5.2 combo update + Apple Graphics update 1.0 Installation: IDE HD w/ GUID BIOS version: P32 IDE: Works out of the box SATA: read works/no write: nForce driver in the works LAN: Marvell 88E1116, beta driver works after unplugging computer. To stop freezing: set cpus=1 Audio: Fully working w/ ALC885 codec using Taruga's HDApatcher v1.20 EFI v8 + modbin 9.2 No, patch audio, use PCI Nic for stability, screen saver/restart/shutdown perfect, sleep no good eVGA NF41SLI133-K8-NF41-AX nVidia nForce4 SLI Chipset Install method: Kalyway 10.5.2 Installation: IDE HD w/ GUID BIOS version: unknown IDE: Works out of the box SATA: read works/write LAN: OOB Audio: Fully working OOB EFI v8 + sleepkernel Yes, screen saver/restart/shutdown perfect, sleep no good . eVGA 680i SLI LT Nforce Install method: Kalyway 10.5.2 Installation: SATA disc and hd Bios is most recent as of Dec 2008 Sata works perfectly, havent tested loads yet. Lan: Works with nforce patch but freezes under load even with different card installed. I believe it is a kernel issue. Ideneb 10.5.6 seems to fix it but not completely sure. Audio works using azalia, hadnt tried patching using ALC880 Nforce kernel. Sleep broken [ Hardware Name (alphabetical) Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch A76ML-K ATI Radeon HD3000 series IDE: Works SATA: No Install Method: iPC OSX8x 10.5.6 INTEL/AMD SSE2/SSE3 Universal No audio for on board (VIA VT17088). Kernel Panic on installer exit, restart, shutdown, Sleep not yet tested. You MUST disable SATA before installing as it will goto "waiting for root device" error, enable after install is fine. MB6497-RS SiS964 Install Method: Leo4All v4 Beta (10.5.2) Audio: Realtek AC97 ALC655 (Works with this driver) Lan: Realtek RTL8201BL (SiS900 chipset, works with this driver) IDE: Not Tested SATA: Works Shutdown/Sleep: Works USB2.0: sometimes errors Vanila not tested No P9657AB-8EKRS2H Intel 965 Express Install Method Retail DVD + Aple 10.5.2 Combo Update Audio Intel ICH8R ( Works with drivers from Kalyway 10.5.1 DVD ) Lan Works W/ Vanilla Kext IDE ( Not Tested ) SATA Works in AHCI Mode Shutdown / Sleep ( Sometimes it will shutdown without issue, other times it may hang for a bit before shutting down ) Overall Usability ( High ) EFI V8 GUID/MBR + Vanilla Kernel No P9657AB-8EKRS2H Intel 965 Express Install Method Patched Leo4All 10.5.2 Audio - not tested Lan Works out of box Firewire works out of box IDE (jmicron) Works fine after patching DVD SATA Works in AHCI Mode Shutdown / Sleep No problems shutting down, have not tested sleep Overall Usability ( High ) Leo4All + Vanilla Kernel No M7PMX-S Intel nForce 630i Chipset Install Method: Kalyway 10.5.2 with Sleep Kernel Integrated Video only works with one resolution with NVInject basic drivers (1024x768) On-Board HDMI untested, although shows multi-monitor support but only one monitor is connected. Audio - not working, needs ALC888 Patch Lan does not work. Needs patcher or compatible card IDE Works perfect SATA untested Shutdown / Restart / Sleep No problems shutting down or restarting, sleep doesn't work Needs to boot into Single User Mode after install to bypass Setup screen as it crashes on transfer screen. Overall Usability ( High ) EFI V8 + Sleep Kernel Vanilla Kernel not working(infinite reboot loop) No, Needs Audio & LAN Patches. Otherwise fully compatible C51XEM2AA-8EKRS2H NVIDIA nForce 590 SLI Install Method: Zephyroth 10.5.2 rev.1 Video: GeForce 8800GTS 640MB works with nvinject Audio: ALC882D, not working LAN: Marvell 88E1121 Dual 10/100/1000 Base T Enthernet PHY, not working IDE: Works SATA: Does not work Shutdown / Restart / Sleep: No problems shutting down or restarting, sleep is untested Overall Usability ( Mediocre ) EFI/Vanilla not tested No, needs patches for Audio, LAN and SATA. P45A-S Intel P45 Chipset Will not install. Won't recognize Firewire port and stops installing there. Turning off the Firewire port doesn't work, simply causes more errors. N/A No, not at all. . [ Hardware Name (alphabetical) Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch GA-EP45-DS3 Intel P45 ICH10 Note from someone else: I found this entry to be misleading about the audio chipset. Use the next one. You only need the two kexts from Taruga: HDAEnabler.kext, and ALC888 Address 2 AppleHDA.kext. You don't have to deal with any Linux dump. Putting the kexts in the EFI partition did not work since they had dependencies in the original kexts. DSDT patch & ChameleonSM for pure vanilla setup. Install Method: Chameleon + Retail Method - SATA AHCI Mode Bios revision F8 (current) All 6 SATA detected as Generic AHCI - Need to add Device ID to AppleAHCI for correct detection (3a228086) JMicron JMB368 IDE: Detected not tested yet. (197b2368) Dual Gigabit OOB (10ec8168 rev 02) Firewire OOB (Texas Instrument TSB43AB23 (104c8024) All USB OOB Audio: ALC885 (3a3e8086 rev 02)Internal/Microphone working with this guide Used with Quad Xeon X3320 Shutdown/Restart: Psystar OpenHaltRestart ChamelelonEFI + Vanilla Kernel No - Audio need to patch.. New DSDT Method :- run the DSDT Patcher with -newHPET from terminal, edit the dsdt_fixed.txt in Debug Folder (search and replace 'AZAL' with 'HDEF') recompile the dsdt-fixed.txt (iasl dsdt_fixed.txt), copy the dsdt.aml to / - copy the chameleonsm (cp chameleonsm /boot). Before reboot remove/backup all patched kext files, run "kextcache -a i386 -m /Extra/Extensions.mkext /System/Library/Extensions/". Now you can safely reboot.. A simple sed for changing AZAL to HDEF -> sed -i 's/AZAL/HDEF/' yourfile . Then you can run -> grep HDEF yourfile" - to see if the changes are made. GA-EP45-DS3L Intel P45 ICH10 Install Method: KALYWAY and IATKOS 10.5.2 works perfectly (need to set to AHCI in BIOS and install in first partition of drive). RECOMMENDED METHOD: Also works perfectly with RETAIL DVD or existing Leopard volume using Chameleon install method combined with LS8 patch pack (see links below). Audio: Works perfectly with linux audio codec dump (see linked file) and Taruga's 3 files HDApatcher, HDAEnabler.kext, and ALC888 Address 2 AppleHDA.kext (to have full bass use AppleHDA.kext that is modded using limini's method) LAN: onboard works only with SMB, AFS, and bonjour not reliable, use the card mentioned here All 6 SATA AND 2 IDE Ports work perfectly OOB, including both kinds of SATA/IDE hard drives and optical drives. Need to set ACHI setting in BIOS before install. USB2 Ports work perfectly. ICH10 working OOB WORKS OOB: Shutdown, Sleep and Reboot. Retail install needs patch here Core 2 Duo 3Ghz E8400 processor working perfectly, add-on Bytecc Firewire card working OOB. Palit NVidia 8600 card working perfectly. Running Leopard 10.5.5 Great overclocking board. Overclocked at 3.6Ghz with stock Intel cooler. Overclocked at 3.87Ghz with add-on Scythe Shuriken CPU cooler. XBench score of 216. 1720 Mhz Front-Side Bus. 30% faster than the iMac 3.06Ghz Extreme, even for the graphics surprisingly! The overclocked front-side bus elimanates most of the system bottlenecks. 30 successful installations reported for this new Gigabyte motherboard. Comment by one user (most don't have this problem): I had to perform entire installation process with only 1 piece of RAM. I wasted several hours dealing with incredible slowness before I figured this out. for more info visit: RETAIL DVD with 10.5.5 &10.5.6 install with all kexts and audio downloads for this exact board Method for RETAIL DVD install or existing authentic Leopard volume Bios Settings, and other installation info LS8 patch pack. Additional fine-tuning patches for after Kalyway and Retail DVD installs - For Gigabyte motherboards Troubleshooting discussion thread for installing on this motherboard + CODEC DUMP FILE Troubleshooting discussion thread for post-installation problems on this motherboard AppleHDA.kext that is modded using limini's method for full bass Kext Installer Application for Taruga and other patches YES: ChameleonEFI or KalywayEFI, + Vanilla kernel No. Need to install Audio patch. Very easy to do. Use also LS8v12 kext patch installer for this board for optimal performance. If installing 10.5.5 Leopard update, you must install 10.5.4 first along with LS8 patch pack before the 10.5.5 update. Avoid NVinject kext since it may not be compatible with all NVidia graphic boards (NVinject may cause bootup crash), use the proven LS8 pack instead. GA-EP45-DQ6 Intel P45 ICH10 Install Method: You can use the same LS8_install_pack as for the P35-DS4 Audio: ALC889A works (In/Out/Mic/SPDIF) with patch AppleHDA.kext LAN: all 4 LAN work w/ vanilla kext, need RTL1000.kext for AFP/Bonjour Purple SATA port (gigabyte SATA) Works w/ vanilla AppleAHCI.kext Orange SATA port (ICH10) will need a patch IOATAFamily.kext Raid on ICH10 working with ChameleonEFI IDE Works WORKS: Shutdown, Sleep and Reboot for more info visit: GA-EP45-DQ6 Thread LS8 Install Pack Thread karaakeha's RAID guide ChameleonEFI + Vanilla kernel No GA-EP45-DS4P Intel P45 ICH10 Install Method: Kalyway 10.5.2. Upgrade to Kalyway 10.5.3. Used Software update to go to 10.5.4 Audio: ALC889A works (In/Out/Mic/SPDIF) with Taruga's new AppleHDA enabler and HDAudio.kext LAN: the two LAN work w/ vanilla kext. Have not tried apple talk, etc. SATA port (ICH10) works out of the box. Have one HD connected to one of the controllers and a BluRay/DVD/CD connected to the other. Raid on ICH10 working with ChameleonEFI IDE Works Shutdown, Sleep and Reboot don't work. Used this [to fix power off only. for more help you can sop by at: GA-EP45-DQ6 Thread PC_EFI version 8 + Vanilla kernel No GA-EP45-UD3P Intel P45 ICH10 Stub will update with more info, but working 100% Install Method: Kalyway 10.5.2 -> 10.5.5 Retail Audio: ALC889A ChameleonEFI + Vanilla kernel No. Audio needs patching. GA-X38-DS5 Intel X38 Install Method: Retail DVD + Apple 10.5.2 Combo update (dsmos.kext only needed to boot it) BIOS Version: F6 Audio: ALC889A works (In/Out/Mic/SPDIF) with patch AppleHDA.kext (will break shutdown), using AppleHDA.kext w/ fix shutdown breaks Mic input LAN: Works w/ vanilla kext Purple SATA port (gigabyte SATA) Works w/ vanilla AppleAHCI.kext Orange SATA port (ICH9) will need a patch IOATAFamily.kext IDE Works WORKS: Shutdown, Sleep and Reboot (Not working on Vanilla kernel) EFI V8 GUID/MBR + Vanilla kernel No X38-DQ6 Intel X38 Install Method: Kalyway 10.5.1 & Kalyway Combo Update BIOS Version: 3.70; Revision: 1.0 Audio: ALC889A works with patch LAN: Works OOB SATA & IDE: SATA & IDE work OOB Optical Drive: Samsung on SATA works Unknown No, audio needs patching EX38-DS4 (rev 1.1) Intel x38 Install "leoallv2 version" 10.5.2 all ok (ethernet realtek works fine, audio works fine with alc 889) EX38-DS4 Intel x38 with ICH9R Install Method: Kalyway 10.5.1 & Kalyway Combo 10.5.2 Update using PCWIZ's Tutorial and Additional Installers Audio: ALC889A Works 100% with PCWIZ's patch (applied twice, first time didn't take.) Ethernet: Works 100% SATA: All 6 ports work @ 3.0 Gigabit USB: 2 ports reported as High-Speed 2.0; 6 ports reported as USB 1.0 (Have not pursued a fix at this time) Optical Drive: SATA LITE-ON DVDRW LH-20A1L Works 100% IDE: Not tested. Shutdown, Sleep and Reboot: Works Video Card: EVGA 8800GT 512 MB patched with Scott Dangel's NVinstaller v.41 Installed AFTER Kalyway Combo 10.5.2 Update. Works 100% (Core Image, Quartz Extreme and Rotation All supported) Ram: 8 Gigs of 4 x 2GB G.Skill DDR-1000 PC2-8000 F2-8000CL5D-4GBPQ All Recognized and Works 100% Yeah Baby!!! Processor: Intel Quad Core Q6700 @ 2.67GHz Yes. Fully supported EFI v8 + Vanilla kernel No. PCWIZ's Addtional installer needed and Scott Dangel's NVinstaller v.41 needed. GA-EP35-DS3R v2.1 Intel P35 Install Method: Kalyway + Apple Update 10.5.2 + Adobe Graphic Update BIOS Version: F2 Audio: Works with AppleHD patch (2.1 and digital) LAN: Works out of the box SATA works in AHCI mode (NCQ working) Yes. Fully supported EFI v8 + Vanilla kernel No. Audio need patch. GA-EP35-DS3 v2.1 Intel P35 (ICH9) Install Method: IATKOS 1.0r2 + Apple Update 10.5.2 but direct update from 10.5.1->10.5.3 BIOS Version: F2 Audio: Works with AppleHD patch LAN: Works out of the box SATA works, but detect only 2 drives, need patches to see all SATA drives. Yes. Fully supported EFI v8 + Vanilla kernel No. Audio need patch. GA-EP35-DS3R Intel P35 & ICH8 Install Method: iATKOS v1.0i, Brazilmac had problems with Rosetta apps BIOS Version: F12; Revision: 3.3 Audio: Audio888 installer package from Skippyretard and AppleHDA patcher v1.20 LAN: No, edit 8053 to 8056 and 62 to 64 in the Apple Yukon2 kext SATA & IDE: Only 2 SATA ports work Unknown No, Audio & LAN need patches GA-EP35-DS4 Rev. 2.1 Intel P35 Install Method: Leo4All v2 BIOS Version: F12<? conformation please Audio: OOB - Used 889 (says DS3R) LAN: OOB - Realtek SATA & IDE: OOB, ICH9 - AHCI, J - IDE (else no DVD boot) Firewire: OOB Bluetooth: USB dongle working Sleep: OOB Yes (Vanilla 9.2.2) Yes. I used MBR, and does dual-boot XP. GA-EP35-DS4 Rev. 2.1 Intel P35 Install Method: Retail DVD and Patched kext's BIOS Version: F2 or F3 Audio: Works with patched AppleHDA.kext LAN: Works out of the box SATA & IDE: SATA works OOB, IDE with Patch Install Guide by Coadey Install Guide by Karaakeha1 Install Guide by LTL Yes (9.2.2) No. Audio patch needed. GA-EP35-DS4 Intel P35 Install Method: Kalyway 10.5.2 BIOS Version: F2 Audio: OOB LAN: OOB SATA & IDE: normal SATA works OOB, but not with software RAID0/1 (may have been my disks however). IDE untested. Note: Thanks to all those with GA-P35 and EP35 boards who posted here! Bought board for compatibility - was not disappointed. Yes (9.2.2) Yes. EP35-DS4 Intel P35 Install Method: Retail DVD (See Below) & Netkas to 10.5.2 BIOS Version: F1; Revision: 1.0 Audio: ALC885 works with AppleHDA Patcher LAN: Works OOB SATA & IDE: Both work OOB Install Guide by ls8 EFI v8 Works No. Audio patch needed. GA-G33M-S2 Intel G33 Install Method: Kalyway 10.5.2 on IDE disk, works out of the box Video: Onboard Video Chipset Intel GMA 3100 works out of the box at 1024*768 LAN: Onboard Realtek RTL8111B Works out of the box, DHCP works OK USB: works OK Audio: Onboard Realtek ALC889A not tested No. Video patch needed GA-M57SLI-S4 nVIDIA® nForce 570-SLI Metodo de instalacin LEO4ALLv3 opciones seleccionadas: Netkas 9.2.0 Sleep ACPIPlataform sin seleccionar ninguna SMBIOS - DDR800 Audio - ALC 888 NVInject - 256 MB v 0.2.1 (Trabaja lo basico con el NVidia Universal Installer.mpkg.zip funciona perfecto la tarjeta de video) ForceDeth no funciona la tarjeta de red solo la detecta y detecta un modem (no se de donde jj) Nforce Test. Tiene 4 GB de RAM pero al instalar se congela a 3 minutos de acabar hay que remover 2 Gb e intalar si se agrega despues no causa problemas (hasta ahorita). DVD SATA Disco IDE 500Gb LAN Marvell 88E1116 phy (10/100/1000 Mbit) CPU AthlonTM 64 X2 4800 Dual-Core Audio: Onboard Realtek ALC888 CODEC chip Onboard T.I. TSB43AB23 chip Video Nvidia Geforce 8600GT unknow No, Video y LAN necesita parche GA-M61PM-S2 Rev. 2.0 NVidia nForce430 Install Method: Zephyroth AMD Rev.1.4033109 BIOS Version: F3 or F9c Audio: Works with patched AppleHDA.kext LAN: Not working Video: Not tested. Using GeForce 8600GT (PCI-e) SATA & IDE: SATA works OOB. Unkown Needs DVD to boot. GA-M61SME-S2 NVidia nForce 6100/415 Install Method: kaly AMD BIOS Version: F9 Audio: Works with patched AppleHDA.kext LAN: Not working Video: No QE/CI Using GeForce 8600GT (PCI-e) SATA & IDE: SATA works OOB. GA-M61P-S3 Rev. 1.0 NVidia nForce430 Install Method: Leo4Allv3 Audio: Works using ALC883.kext LAN: Not working Video: Integrated GeForce 6100 (No QE/CI) SATA & IDE: SATA works OOB. Vanilla 9.2.0 kernel works great Still working on LAN Drivers. nForce drivers don't work GA-P35-DS3 Intel P35 Install Method: Kalyway 10.5.1 + Patched Kalyway Update 10.5.2 + Patched Kalyway Kernel 10.5.2 + Graphic Update BIOS Version: F12 Audio: Works with AppleHD patch (2.1 and digital and input) LAN: Works out of the box SATA Support works without AHCI IDE Suppport works Yes. Fully supported EFI v8 + without Vanilla kernel No. Audio needs patch. Bonjour and UPNP services like Connect 360 do not work OOB. Shutdown does not work with vanilla kernel. GA-P35-DS3 Intel P35 Install Method: Kalyway 10.5.1 & Kalyway Combo Updater BIOS Version: F12; Revision: 2.1 Audio: Works with HDA ICH9 ALHC888 works & Apple HDA Patcher v1.20 (EDIT: actually is a ALC889a that patch works great) LAN: Works OOB SATA & IDE: SATA works with IOATAFamily.kext V1.1 Optical Drive: LG GSA-H55L IDE (Fully Working with IDE to SATA Cable ) Shutdown & Sleep don't work, restart unknown EFI v8 & Vanilla Kernel No, Audio needs patching GA-P35-DS3L Intel P35 Install Method: Kalyway + Apple Update 10.5.2 + Graphic Update BIOS Version: F8f Audio: Works with patched AppleHDA LAN: Works out of the box, Bonjour might need R1000 kext. SATA & IDE: SATA woks OOB, AHCI works with all ports with This Shutdown and Restart work, Sleep doesn't work Yes. Fully supported EFI + Vanilla kernel No. Audio doesn't work GA-P35-DS3P Intel P35 + ICH9R Install Method: Kalyway 10.5.1, Kalyway 10.5.2 Combo Updater & Kalyway Kernel update BIOS Version: F8; Revision: 2.0 Audio: works with ALCinject.kext and AppleHDA.kext LAN: LAN working out of the box SATA & IDE: SATA works out of the box, using AHCI Yes. Fully supported EFI + Vanilla kernel No; Audio need patching GA-P35-DS3P (REV 2.1) Intel P35 + ICH9R Install Method: Leo4All V2 BIOS Version:; Revision: 2 Audio: Model, ALC889A - Used Taruga AppleHDA patcher; removed ALCInject.kext its not needed with EFI string LAN: Model, Realtek 8111B SATA works, in BIOS set all disk modes to ACHI (see patching note) IDE: not tested (yet) Samsung SH-203B - Sata interface Yes, all. Firewire, and USB ports all working Yes; EFI & 9.2.2 vanilla No, Audio needs patching (see above) GA-P35C-DS3R Intel P35 + ICH9R Install Method: iDeneb 10.5.5 Hardware: Intel Core 2 Duo 2.66GHz CPU, Patriot 4GB DDR2 667MHz memory (dual channel), EVGA NVIDIA GeForce 8400GS PCIe graphics card, 600watt Cooler Master PSU, Samsung 1TB SATA HDD, Sony IDE DVD+-RW/DL Burner. Everything works out of the box, except for the following: IDE (Gigabyte SATA2 controller chip, which is a re-branded JMicron ATA/SATA controller). I just changed IOPCIPrimaryMatch in JMicronATA.kext and it worked. NVIDIA Dual-monitor setup. I just tweaked the NVCAP value in NVinject.kext and it worked. See NVinject forums for info. Sleep and shutdown. To get both of these working, I changed Suspend type to S1 in the BIOS, and installed "poweroff_fix" (search the InsanelyMac forum) which disables 1 of the CPU cores at shutdown time. Working out of the box: Full audio (ALC889), LAN, SATA (set BIOS to AHCI mode), USB, PCIe, Bluetooth, IDE DVD Burner, Video with NVinject (QE/CI), EFI, Vanilla kernel, etc. Yes Almost (See fixes I've listed here). GA-P35C-DS3R Intel P35 + ICH9 Install Method: Kalyway + Apple Update 10.5.2 + Graphics Update BIOS Version: F4 Audio: Works with patched AppleHDA + ALCinject (mic works) LAN: Works out of the box, but sourceforge Realtek R1000 driver is better (fixes Bonjour) SATA: SATA works out of the box, using AHCI on ICH9 controller (JMicron disabled) Yes. Fully supported EFI + Vanilla kernel No. Audio needs patch GA-P35-DS3R Intel P35 + ICH9R Install Method: Kalyway 10.5.1 + Kalyway Upd. 10.5.2 + Vanilla kernel 9.2.0 + Graphics Upd. BIOS: Sata native mode, 64 bits enabled, Vanderpool enabled, Sleep S0 (S3 doesn't work) Audio: works with patched AppleHDA + ALCinject LAN: works out of the box SATA: works out of the box, using ICH9R without AHCI (JMicron disabled) Yes. Fully supported EFi + Vanilla kernel (kernel 9.2.2 ok) No. Audio needs patch GA-P35-DS4 (rev.2) Intel P35 Install Method: Kalyway 10.5.1 & Kalyway Combo Updater & Leopard GA-P35-DS4 install pack (http://forum.insanelymac.com/index.php?showtopic=77165) BIOS Version: F11; Revision: 2 Audio: Works with HDA ICH9 ALHC889A LAN: Works OOB SATA & IDE: SATA(ahci) works and IDE to Optical Drive: SAMSUNG SH-S182M IDE FW and USB working OOB Shutdown & Sleep work, restart unknown EFI v8 & Vanilla Kernel No, Audio needs patching GA-P35C-DSL Intel P35 Install Method: Kalyway 10.5.1 & Kalyway Combo Update BIOS Version: F6; Revision: 2.0 Audio: ALHC888 and Apple HDA Patcher v1.20 LAN: Doesn't always work SATA & IDE: Both fully working Optical Drive: LG GSA-H22N BK (Fully Working) Shutdown & Reboot fully working, Sleep not tested EFI v8 + Vanilla Kernel No. Audio needs patch GA-P31-DS3L Intel P31 + ICH7 Install Method: Kalyway 10.5.2, iDeneb 10.5.5, Jas 10.5.2 and Leo4all 10.5.2 BIOS Version:; Revision: Audio: ALC888 with AC97 kext (on DVDs) or ALC888audio (6 channel and inputs) LAN: 8111 (kext on DVDs) SATA & IDE: SATA and IDE works Updates working with IntelCPUPMDisabler.kext Shutdown, sleep and restart works with shutdownfix Vanilla works with core duo and core2duo processors. EFIv8 works. Yes GA-P31-DSL Intel P31 + ICH7 Install Method: BrazilMac Patched DVD & MBR Partition BIOS Version: F8; Revision: Unknown Audio: Realtek ALC888 works with AppleHDA Patcher LAN: RTL 8111B works OOB SATA & IDE: Works OOB EFI v8 Works Audio needs patching GA-G33M-DS2R Intel G33 Install Method: Kalyway 10.5.1 + manual Update to 10.5.2 + Graphic Update BIOS Version: F6 Audio: Works with AppleHDA patch (stereo out, front panel, digital, mic, line in) LAN: Works out of the box SATA 6 ports works AHCI IDE works Thysm00 Guide Yes. Fully supported EFI v8 + Vanilla kernel No. Audio needs patch. GA-G31M-ES2L Intel G31 Install Method: Retail disk, using HFS+ EFI bootloader BIOS Version: F3 Audio: Realtek ALC662, untested LAN: Works out of the box SATA & IDE: Works out of the box Yes. Fully supported EFI + Vanilla kernel Audio may need patch. GA-G31M-S2L Intel G31 Install Method: iDeneb 10.5.5 - selected: Vanilla Kernel 9.5 on Intel Core2Duo 7200 BIOS Version: F8a Audio: Realtek ALC662 works 100% using Alc662 chipset patch on installer DVD LAN: Works out of the box SATA & IDE: Work OOB using ICHx chipset patch on installer DVD Yes. Fully supported EFI Chameleon + Vanilla kernel No. Audio needs patch. GA-G31M-S2L Intel G31 Install Method: LEO4ALLv3 -selected:Vanilla Kernel 9.2.2, EFI, & ICHx Chipset drivers SM Bios 2.3, ACPI 1.0b, PnP 1.0a, DMI 2.0 Audio: Realtek ALC662 works with AppleHDA patcher & alc662.txt or Use Azallia Audio on installer DVD LAN: Works out of the box, reccomended to set ip address manualy. *Bonjour doesn't work properly! Switched to Netgear GA311 for full compatibility. SATA & IDE: Work OOB using ICHx chipset patch on installer DVD Thysm00 Guide Yes. Fully supported EFI v8 + Vanilla kernel No. Audio needs patch. GA-G31M-S2L Intel G31 Install Method: Kalyway 10.5.2, Vanilla Kernel Configuration: M/B, Core2Quard (detected as 2.4 GHz Unknown), Radeon X1600XT (id 0x71c0), 2x1GB DDR2 After installation: 1) download Azalia HD Audio Fix 2) Fix VideoCard 3) 4) Fix Reboot/Shutdown/Sleep? problem 5) 10.5.3 ComboUpdate 6) Download 10.5.4 update from AutoUpdate LAN: Works out of the box, reccomended to set ip address manualy. *Bonjour doesn't work properly! But, sometimes after correct (not manual) restart/shutdown, LAN not working (error - cable unplugged). SATA & IDE: Work OOB using ICHx chipset patch on installer DVD Thysm00 Guide Correct reboot & shutdown working after path, sleep maybe not working. Internal video not fully working. Yes. Fully supported EFI v8 + Vanilla kernel No. Audio needs patch. GA-G31M-S2L Intel G31 Install Method: iDeneb 10.5.5 Selected packages (during installation): ALC662, ICHx chipset patch Audio: required patching (see right) LAN: Works out of the box. SATA & IDE: Had problems booting with SATA disk drive. PATA worked with no problems. Yes. Fully supported EFI v8 + Vanilla kernel No. Installed AzaliaAudio.zip from [ GA-G31MX-S2 Intel G31 Install Method: Jas 10.5.4 Audio: Realtek ALC888 works out of box LAN: Realtek RTL8110SC works out of the box SATA & IDE: SATA works out of box, IDE DVD-ROM drive works Video: Intel GMA 3100 has no core image or quartz extreme, will add Nvidia 7300LE 256MB card later Yes. Yes GA-K8NF-9 NVIDIA nForce4 (4X) MCPs Install Method: Zephyroth Leopard 10.5.2 AMD BIOS version: Unknown Audio: Realtek ALC850 Audio AC'97 Codec : Works with Kext but, may works out of the box. LAN: Works out of the box SATA: Works out of the box IDE: Not tested Yes Yes GA-K8N-SLI NVIDIA nForce4 Install Method: Leo4All v2 BIOS version: F9 Audio: Realtek ALC850 -marked 850 driver in Leo install. LAN: Works OOB SATA: Works OOB IDE: Works OOB Restart & Shutdown work, no Sleep Yes Yes GA-K8N51GMF-9 NVIDIA nForce 430 Install Method: Zephyroth Leopard 10.5.2 for AMD BIOS Version: F7; Revision: Unknown Audio: Yes (Stereo) works with "beta4some860_880" LAN: Works with forcedeth-nockd.kext SATA & IDE: Does SATA work? Any options in BIOS or Patches?